PoE Injector for HikVision 2CD2032-I

visibleman · 3 Jan 2015 at 17:37

Hi All,

I've seen Ubiquiti injectors (around £10, so pretty cheap) but from what i can see, they're either 15 or 24v which i'm assuming doesn't conform to 802.3af? :confused:

So can anyone recommend a decent PoE injector for a (single) 2CD2032-I? Would something like the Level One POI-2002 be adequate?

Tar

Caged · 3 Jan 2015 at 17:54

That would be fine. 802.3af power injectors should cost you around £10 on eBay.

visibleman · 3 Jan 2015 at 20:32

Awesome, cheers Caged

Steveocee · 3 Jan 2015 at 23:24

Ubiquiti injectors are fine. On average I deploy 3 a day and never have any problems.

Caged · 3 Jan 2015 at 23:56

They won't work with 802.3af kit though.

bremen1874 · 4 Jan 2015 at 00:26

Their 802.3af injectors will. You wouldn't use their propriety injectors for this.

Caged · 4 Jan 2015 at 00:37

None of their injectors claim 802.3af compatibility:

http://dl.ubnt.com/datasheets/poe/PoE_Adapters_DS.pdf

There's no reason to buy them over the one in the OP.

bledd · 4 Jan 2015 at 01:12

I wouldn't rule out looking at getting a PoE switch (even an 8 port non managed one)

Leaves room for expansion.

Scream · 26 Apr 2015 at 14:38

Is there anyway of powering Ubiquiti AP's from a 802.3af Poe Netgear,TB-Link Switches without having to use the supplied Ubiquiti injector? Bit of a pain when you are stuck for room in a cabinet or weatherproof enclosure.

Prophet · 26 Apr 2015 at 14:53

bledd. said:
I wouldn't rule out looking at getting a PoE switch (even an 8 port non managed one)

Leaves room for expansion.

I've just used one of the Ubiquiti 24 port PoE managed switches and found it very easy to configure and manage.

We're deploying another 12 over the next 8 weeks.

visibleman · 26 Apr 2015 at 15:20

Scream said:
Is there anyway of powering Ubiquiti AP's from a 802.3af Poe Netgear,TB-Link Switches without having to use the supplied Ubiquiti injector?

I'm sure i've seen Ubiquiti 802.3af/at adaptors (priced around £20 each) that allow you to use their non-compatible hardware with 802.3 injectors/switches - not sure if it'll work with all of their hardware though.

Steveocee · 26 Apr 2015 at 17:43

Mikrotik do the RB260GSP which is quite nice. 5 port switch with 4 ports giving POE and they definitely run UBNT kit.