Post your highest stable FSB......

Threshold · 31 Jul 2007 at 12:36

Hi all!
Just out of interest I want to get an idea of how high people have managed to get their FSB on a stable system.

Which board your using? BIOS version?
Show me what u got!!

Amonlym · 31 Jul 2007 at 12:55

bootable: 273 mhz, using 3700 sandy and 2*512mb sticks
bootable: 253mhz, same cpu, 2*1024mb sticks
Bootable: >258mhz using 4800 toledo and 2*1204mb sticks

windows (u-guru) >282mhz using Toledo + 1gig sticks

Abit AX8 Rev2
the KT890 isnt really very good at this game...

simonnance · 31 Jul 2007 at 14:14

P5K Deluxe, E6400, 4GB DDR2 => 485MHz Prime Stable

486 wont even boot.

Might pull a pair and see if it can do any better.

gt_junkie · 31 Jul 2007 at 14:21

334mhz using a DFI SLi-DR with an Opteron 165!

Great X2 board!

475mhz on a DS3 rev.1 - the northbridge was cooking let me tell you! :eek:

gt

paradigm · 31 Jul 2007 at 14:31

422 is the FSB wall of my chip, my board would happily go higher (judging from similar boards). I run 400 daily though.

Abit IP35-PRO, with July b04 beta BIOS.

Threshold · 31 Jul 2007 at 18:06

simonnance said:
P5K Deluxe, E6400, 4GB DDR2 => 485MHz Prime Stable

486 wont even boot.

Might pull a pair and see if it can do any better.

485!! My god thats huge! And stable?! :eek:

w3bbo · 31 Jul 2007 at 18:26

500FSB

V|per · 31 Jul 2007 at 18:41

525mhz bootable to windows ( lowest multi though, and 1,8v :eek:

)

500x8 stable for about an hour (was at 5 hours at one point, but seems to crap out after an hour or so each time, again, 1.8v)

475x8 prime stable at 1.7v (bios) 1.65v true

spec in sig, pretty similar to yours mate

oh, thats with 4gig, not 2gig (4x1gig)

Mul · 31 Jul 2007 at 19:14

DFI LanParty ICFX3200 RD600 12/2/07 BIOS - 476FSB, 1.76V Northbridge. 458FSB 1.66V 24/7

Mul

Biffa · 31 Jul 2007 at 21:01

456 on my 965 DS3 Rev1 and E6320 at 1.3V stock multi

Nick1881 · 31 Jul 2007 at 21:26

450mhz

E6300 @ 3.15Ghz, Ds3, G.Skill PK 2Gb.

Doesnt like going any higher, but my temps are great so im happy.

Munky1080 · 31 Jul 2007 at 22:45

305Mhz on the rig in my sig...anything over that and I can't boot even though I know the cpu will go higher.....

vocch · 31 Jul 2007 at 23:45

On Air!...and 8hr prime.

simonnance · 1 Aug 2007 at 00:13

Threshold said:
485!! My god thats huge! And stable?!

new BIOS, increased FSB.

Not sure how high it will go now!

BEn_2600+ · 1 Aug 2007 at 00:24

486FSB Orthos Stable, no picces to prove tho

Garyj881 · 1 Aug 2007 at 09:26

380FSB on my 956-DS3P.

Will boot at 385 but not stable with upto 1.55v

Threshold · 1 Aug 2007 at 12:57

V|per said:
525mhz bootable to windows ( lowest multi though, and 1,8v )

500x8 stable for about an hour (was at 5 hours at one point, but seems to crap out after an hour or so each time, again, 1.8v)

475x8 prime stable at 1.7v (bios) 1.65v true

spec in sig, pretty similar to yours mate

oh, thats with 4gig, not 2gig (4x1gig)

What Bios version are you using? I'm still on P23