Power Consumption in Server Room

[satanicguardian]

Hi guys,

I've been asked to spec up potential max power drawer for a server room in a new building for a customer. The electrician has requested to know what kinda circuit/breakers need to go in. It's only a small company and will be using the below (Wattage estimated based on W=VxA).

• ADVA FSP150CP (Fibre/Copper converter) - 40W
• ADVA FSP150CCf (Copper Multiplexor) - 120W
• Huawei AR1200 (Voice Router) - 160W
• Huawei AR200 (Data Router) - 36W
• Cisco Catalyst 48 Port Switch - 370W
• Dlink DSR1000AC Router - 24W
• Dlink DGS-1510-28p - 238W
• Fujitsu RX2540 M2 378W
• Seagate 3TB Backup Drive - N/A

Total Wattage Draw - 1366W

I believe we've already specced the UPS (a colleague has) - Fujitsu APC Smart-UPS and MNGT card 1500VA LCD RM 1U 230V (SMX1500RMI2U + AP9630)

Does this look correct? Based on this wattage what would you guys recommend I have fitted for this room? I also need to work out the max load in volts and amps, is it possible to reverse engineer that from the total wattages?

Thanks guys!

Jamie

 

[satanicguardian]

Might need to up the UPS power requirements if there is a risk of hitting peak loads, the UPS is only rated for 1200W. A 2kVA unit will allow up to 1600W.

Apparently not all of the kit is going into the UPS I've since found, all of this:

• ADVA FSP150CP (Fibre/Copper converter) - 40W
• ADVA FSP150CCf (Copper Multiplexor) - 120W
• Huawei AR1200 (Voice Router) - 160W
• Huawei AR200 (Data Router) - 36W
• Cisco Catalyst 48 Port Switch - 370W

Is vodafone one net kit, which bypasses the UPS it seems. Just need to know the max potential draw on the power supply in room