power on problems (again)

Soldato
Joined
14 Oct 2007
Posts
5,372
Location
wubalubadubdub
ok hi again, im back... with the same problem :(
as some may remember i had this problem a while back which was fixed by a bios update... but now its back.... and there arn't any updates later then the 1.5 which is currently installed.

just to recap heres the problem;
basically... i come home, switch pc on by the mains (have to wait about 3 seconds) then i switch it on at the front, it flashes once (quickly) and stays off and i have to keep pressing it a few times, after a few attempts it finally comes on and starts up no problem :confused:

HELP!
 
havn't really got the time to try all different things like that, im just a lil worried that it may be a possible mobo fault and that one day it may never switch on again :(
 
OK, but spending 5 mins doing that might solve the problem.

If its the board in your sig, my server runs the Abit version, and it suffers from the double-boot problem
 
it is the one in the sig, i have heard the abit version is meant to be a lot better, but how much do they cost now???
 
i think if i leave the mains on for a bit it would be ok, would this mean it may be a possible issue with the psu (as it needs time to adjust it's 'internal power switch')
 
to save the ELECY!!!! and i think it causes 'waring' to your pc if its off for a long time with all that 230v of power going through it and not being used :)
 
I had a similar problem with 2 x 680i motherboards from EVGA and so changed to a 780i Asus when they came on the market only to find the same problem with that board. It only happened if the power supply lead was disconnected and when I put the current EVGA 780i in the machine it did the same again. I very often had keep pushing the switch multiple times until in the end it booted up. Then it would be ok for months, but as soon as I pulled the lead out of the back the same problem again. Sometimes I had to push the switch 20 times. I spoke to overclockers and they were at a loss for an answer.

The solution: I had a lightning protector switch that I had the PC plugged into and after removing it from the circuit the problem was solved. I had been using it for years and it doesnt give me a problem on my other PC that is a few years old and uses an older ASUS motherboard with an AMD 939 socket.
 
oooohhhh thats very interesting because my system is connected to a 6 plug 'surge protector' so would that be whats causing my problems????
 
oooohhhh thats very interesting because my system is connected to a 6 plug 'surge protector' so would that be whats causing my problems????

It has got to be worth trying it without the surge protector just to see if it is your problem. No doubt there are many people who run with surge protectors in their systems that dont have a problem.
 
Back
Top Bottom