PowerAdjust 2 - some questions

macmodder · 14 Jan 2013 at 16:43

I'm looking to monitor and control my small loop with a PowerAdjust 2 Ultra. My loop is going to be fairly basic:

Res > DDC pump > CPU > GPU > Rad 1 > Rad 2

I have some questions about PowerAdjust

1. The Ultra version seems to have a connector for a temperature sensor. Just to confirm, does that mean I can use probe/inline thermometer in my loop but that I'm limited to just 1?

2. PowerAdjust claims to work for both pumps and fans, but there is only one connector. Does this mean I can control the pump OR the fans, or can I still do both (eg with a splitter)?

3. Do I need an adapter cable to connect in a standard DDC pump? I see that adapters are available, but no mention on the PowerAdjust description itself.

hlennie · 15 Jan 2013 at 07:57

Thinking these units daisy chain

macmodder · 15 Jan 2013 at 09:12

hmmm. I think I'll ask a more general question about my needs in this forum and see what people come up with.

Avathar77 · 15 Jan 2013 at 11:07

1.Yes
2.I think it has 2 connectors? But you should be ok to use a splitter as long as the components you are connecting does not go over the power out put(25W)
3.it should come with the 4-pin molex to 3-pin+teco wire adapter.

Also as a side note;
you will get much better responses if you ask the "aquacomputer english forum"