Prime95 - CPU Z showing speed dips?

MrMartyn1984

MrMartyn1984

MrMartyn1984

Associate
Joined
26 Jun 2009
Posts
200
Location
Sunderland
Hi.

Installed my new FX6300 the other day, was testing out Prime95 and no matter what speed it's set on (I've overclocked to 4.4 but this happens with stock speeds) it'll go full speed and then for a second it'll dip to x15 (3000mhz) and then back up to full speed for a few seconds then dip again an continue doing so?

Any ideas.

Have reset bios and even on stock settings it does this?

Idles at 28 and when running prime gets upto 50 degrees
Motherboard is an M5A88-v evo.

Never seen this happen with my Phenom II 550.
 
Kidge said:
My FX4100 throttles exactly the same as you're describing and after Googling for literally hours the only way I could get a stable clock without it throttling was to install AMD Overdrive and then each time I boot the machine I turn on turbo boost and then disable it.....Run prime and it no longer throttles.

Don't know if it will be the same with yourself but may be worth a try?
Click to expand...

Amazingly this works! I now find my CPU hitting 61 degrees under load and it sits at a solid 4444MHz in CPU Z :)

I'm guessing that's a bit too hot for my CPU so am now wondering if it needs slowing down due to my cooler.

I take it there's no way to auto enable/disable the turbo at start up rather than having to do this at each boot?
 
Well as annoying as it is having to turn turbo on and then off and also load my saved profile to put it back to 4.4(mine resets to 4.1?) it does the trick and works.
 
Yeah turbo is disabled in bios but then I'm having to enable and disable it in AMD overdrive (as above) to get the clock rock solid.

Thought it might get a 7.9 in windows experience thing, it gets 7.6.
 
You must log in or register to reply here.
Back
Top Bottom