Prime95 Problems NEED HELP

Associate
Joined
9 Jan 2006
Posts
45
Location
Chester, Cheshire
Within the first 10 seconds of the Blend torture test in Prime95 this came up:

FATEL ERROR Rounding was 0.4999998361, Expected Less than 0.4

Hardware Failure detected,

1 Error, 0 Warnings

Tortoure Test Halted

The systems runs games etc, and 3Dmark05 so i don't understand why this is happening, i used to get pyhsical memory dumps with the blue screen of death, this doesn't happen now....Please help...i don't know enough about RAM.

Thanks
 
Is this a normal problem??? Because all i've done is put a divider 266MHz and changed the DDR Voltage to 2.80V to help with the CPU overclock...

I tested the RAM on that memory tester programe before the overclock, it ran for 6 hours with no errors....so is this still hardware related problem???
 
So in other words... Run the Memtest again with the overclocked system, because last time i ran the Memtest was before i overclocked! And see what results i get? Could it be due to RAM timings??? Any advise on changing them, never attempted it before...just used a divider.

Thanks
 
AMD Athlon 64 4000+ San Dieago Clocked @ 2.92Ghz

CPU Frequency 290
CPU Voltage (Vcore) 1.475v
Hyper Thransport Frequency X3
CPU Multi X10

GeIL 2GB (2x1GB) DDR PC3200 CAS3 Divided 266Mhz
DDR Voltage 2.80V

This is what i'm running...any idea's? So you reckon upping the Vcore could help...how would this help the matter of the timming between 0.49 - to the expected 0.4

Thanks
 
Back
Top Bottom