problem overclocking asrock mobo

[philbo1965uk]

I have the following

asrock p45r 2000
wolfdale e7200 (1066) cpu multiplier 9.5@ 267
4gb ddr3 1333 ram

From the bios stock my FSB 267mhz
1:1 dram ratio

So my ram is running at 267mhz .

If i run a fsb 333 my cpu is 3.1ghz...my ram only runs at 333mhz...isn't it suppose to be at 667 mhz?

The bios doesn't let me lock my dram frequency and i'm stuck tbh

How do I get my ddr3 ram running at its correct 1333mhz.

I'm very new at OC..

 

[philbo1965uk]

yes the readings are from cpuz..

my comp just blue screened.

my frequency for ddr3 1333 i presumed would be at 667mhz

if my FSB is set at 333 and it auto increases my ram frequency...is 333mhz correct ? does it mean 333x4 thus giving me 1333 ?

the only stable Oc ive achieved is 280mhz fsb...this is pants as everyone with this combo (e7200 asrockp45r ) seems to achieve fsb's up to 400mhz which i presume clocks the ram to 1600

I have stable temps even the short try at 333fsb never went over 50c

my knowlwedge is not briliant but i followed these steps from scratch any assistance is most welcome
-------------

set mobo jumpers to 1600 to allow clocking (recommended)
cpu running at 1066 stock 266.7 x9.5
ram running at 1066 even though its rated 1333 and the mobo restrictions removed.

So i assume as having a 1:1 ratio...(previous 3:5) that increasing my FSB to 333 would bring my ram upto its correct speed 1333.

I've i got those facts right or am i wrong?