problems with abit IN9 32x-max

[andrea]

Wondered if anyone could help.

Have just had a pc built with the IN9 mobo, E6600 dual core, bfg 8800gtx and 2gb geil ram.

It won't boot up, display or go into the bios. The error code displayed on the board is 8.7, which is a cpu voltage error, but don't know what the cpu voltage should be or how to change this.

Any ideas?

 

[Klytus]

I had all sorts of problems trying to get my IN9 and E6600 system first working.
My only advice would be to clear the BIOS first, then make sure the BIOS jumper and switch are back in the correct position when you try to reboot.
If that doesn't work then you can also try:-

Try a basic boot with only the cpu, ram, and gfx card installed.
Make sure the cpu fan is plugged into the mobo.
Make sure you have all the appropriate psu cables attached to the mobo (main 24 pin, cpu 8pin and gfx molex).
Mine is a tempremental board - the only BIOS which it is stable with is Beta 1.23.
Good luck

Edit: Are there any BIOS beeps?