Problems with new build, black screen then no response.

Soldato
Joined
20 Mar 2004
Posts
4,612
I built a new PC recently.


The only thing I took over from my previous build was my SSD.

Things have generally been going well, but a few times will playing Totalwar, my screen will suddenly loose it's signal. It's happened about 5 times so far, twice, eveything keep working at the screen came back after 5 seconds. The other times, I can hear stuff running but I can't do anything, discord seems to stop working since I can't hear or talk to anyone, and the picture never comes back. Also the fans start going absolutely ape****. In the end I need to reset the machine.

I've not done much tweaking since I built the machine. I've enabled XMP in the BIOS and once I started getting trouble, I updated the graphics card BIOS and lowered the volatge to 900mV.

Any idea on what could be causing the problem?
 
To me it sounds like it could be a driver issue, perhaps the driver is crashing and loading again. If this is the case then you will see it in the event logs, so check these just after you experience the problems.

This is my 1st time using radeon software in a long time.
I *think* I've installed the beta drivers, 18.11.1
Is there a way to uninstall and put on the tried and tested drivers?
 
Well, had a fun hour.

Last night I uninstalled my radeon drivers and put on the normal drivers, rather then the optional/beta. Machine was fine for the rest of the night, GPU fan seemed to be running a little louder, but no problems.
Was working fine today, then I thought I would install Dark Souls 1 with the DSfix, worked fine for about an hour then I got a blue screen error, believe it was driver_irql. Didn't think much of it, just put it down to bad DSfix settings.
Reset the machine and tried Tomb Raider, got a blue screen within 2 minutes, reset machine, got another blue screen within a minute, doing nothing on the desktop. This happened several times.
Thought screw this and went into save mode to uninstall the radeon drivers, but the uninstaller did nothing, it just sat there, I increased the screen resolution while this was going on and I got another blue screen. Long story short, I got several blue screens in safe mode.

By now I've had enough and I just want to wipe the machine and reinstall Windows, I insert my USB installer and as soon as it tries to load Windows, I get more blue screens!
Last thing I do is go into the BIOS and do a factory reset, now everything works and I'm able to install Windows, which is where I am at the moment.

The only thing I ever changed in the BIOS was turn on XMP.
 
Back
Top Bottom