Problems

Scinto · 29 Nov 2007 at 21:26

transfered my motherboard/cpu/hdd/gpu from my old Antec 900 to a Kandlf LCS with a new 700w Thermaltake PSU, set it all up read the instructions for putting together the LCS.

When i turn it on i get no signal for the monitor, i can hear the harddrives spinning up and all the LED's light up, the pump works same with the GPU fans.

Ive followed some guiding from mates about how to hopefully solve the problem but to no avail,

check connections etc
removed the cmos battery waited 2mins
removed the cmos battery & ram & power cable waited 2mins

thing is it was all working in my 900 this morning so i dont see why it wouldnt work now.

E6600
P5w DH Deluxe
4Gb DDR2 800
3870XT

hmm i have a G15 that doesnt light up when the powers turned on also theres no 4pin connector from the PSU to Motherboard.

Aero · 29 Nov 2007 at 21:31

Scinto said:
theres no 4pin connector from the PSU to Motherboard.

Sounds like the problem there to me tbh try your old psu

Scinto · 29 Nov 2007 at 21:50

the old psu is 580w hiper,

will that be enough for 2x3870's?

Aero · 29 Nov 2007 at 21:54

You didn't say you had 2! lol Try with your old set up in the case. Then see if it boots.

Scinto · 29 Nov 2007 at 22:00

Aero said:
You didn't say you had 2! lol Try with your old set up in the case. Then see if it boots.

already did,

will have to find a converter from 8pin to 4pin,

im building a rig for someone else so their PSU will arrive tomorrow which is a newer Hiper 580w that supports Crossfire so ill use that in the mean time.

Aero · 29 Nov 2007 at 22:03

try with individual sticks of ram in it then