'lo all
I've had this case, a Coolermaster 110, for about 3 years now. I bought it for £235 just after Coolermaster announced they are stopping making the ATCs range as I decided I just had to have one while I could.
The first few of these pictures were taken just after I bought the case as I have had water cooling fitted in cases before this one, and I did post up a small thread at the time. I've just had a major hardware upgrade, gone Intel for the first time ever after using AMD parts for years, and thought it was worth showing some picture of how this case looks now.
Current spec is:
Intel Core 2 Duo E6600
Asus P5W64 WS Pro
Team Xtreem 2Gb 3,3,3,8
Connect 3D X1900 XTX 512mb
WD Raptor 74gb x2 in Raid 0
Pioneer 109 DVD/rw Alu x2
Soundblaster Audigy X-Fi Music
OCZ Modstream 520w
Cathar Storm G4
Swiftech MCP600
JPS Scoop Shroud
Standard 120.2 Heatercore
Tygon 1/2"
DangerDen Fill Port
I'm sure some people will cringe on seeing a CM110 with parts cut out, but this was the first thing I did basically.
The shroud was imported from the US from a company called JPS Performance who have since stopped making parts. It's a full aluminium housing holding 2x 120mm fans.
I needed all of the lower 3 1/4 bay removed to fit the rad and shroud.
I had measuered it all but was still suprised at how tight a fit it was.
I've had this case, a Coolermaster 110, for about 3 years now. I bought it for £235 just after Coolermaster announced they are stopping making the ATCs range as I decided I just had to have one while I could.
The first few of these pictures were taken just after I bought the case as I have had water cooling fitted in cases before this one, and I did post up a small thread at the time. I've just had a major hardware upgrade, gone Intel for the first time ever after using AMD parts for years, and thought it was worth showing some picture of how this case looks now.
Current spec is:
Intel Core 2 Duo E6600
Asus P5W64 WS Pro
Team Xtreem 2Gb 3,3,3,8
Connect 3D X1900 XTX 512mb
WD Raptor 74gb x2 in Raid 0
Pioneer 109 DVD/rw Alu x2
Soundblaster Audigy X-Fi Music
OCZ Modstream 520w
Cathar Storm G4
Swiftech MCP600
JPS Scoop Shroud
Standard 120.2 Heatercore
Tygon 1/2"
DangerDen Fill Port
I'm sure some people will cringe on seeing a CM110 with parts cut out, but this was the first thing I did basically.
The shroud was imported from the US from a company called JPS Performance who have since stopped making parts. It's a full aluminium housing holding 2x 120mm fans.
I needed all of the lower 3 1/4 bay removed to fit the rad and shroud.
I had measuered it all but was still suprised at how tight a fit it was.
Last edited:
