Project: Parvum innit :D (another one)

[Tonester0011]

Stuck in traffic so thought I'd start my P-Log

Will be adding pictures tonight when I get home


Case is the Parvum S1.0 but extended to allow a 120.3 rad at the bottom. Cables are braided by davido_labido.

Edit:

Specs.
i7 4770k
M6G
8gb 2600 TG ram
Gtx 780

Hardware labs black ice 240, 240 & 360 rads.
Scythe gt1850 fans, aquero controller.
Bitspower & monsoon fittings (silver)
Blood red coolant
Motherboard blocks plus other things I can't remember lol.

Back home now
Looking back at the pictures, i made a little mistake....my angled fittings are not rotary Will have to buy some real ones at a later date.

 

[GiraffePencils]

Your lack of details both infuriates and intrigues me

Edit: Also, always a fan of David's work

 

[Uncle Petey]

Very intrigued.

 

[whyscotty]

About time

 

[Tonester0011]

Lol edited first post with spec, that I can remember

 

[Fulax]

Can't have too many Parvum build logs

 

[Something Else]

That traffic must be bad!

Gonna be a nice build.

 

[joelk2]

More parvum. Mmm

wish I could watercool mine.

 

[GreasyDiablo88]

Can't wait to see how this build comes along. I've seen some awesome builds with those cases

 

[davido_labido]

Argh! A build log?!

I best get a move on with your cables then!

Can't wait to see this build. I love any parvum build!

 

[Tonester0011]

Argh! A build log?!

I best get a move on with your cables then!

Can't wait to see this build. I love any parvum build!

No rush mate!
Only reason i'm starting the log now is because i'm no longer in a rush. Instead of having to do everything in a single weekend (need to use the computer, no spares ) I've bought a bundle off Whyscotty, meaning i can do bits in my spare time spread over a few weeks

Bit of a downgrade though, 2600k instead of a 4770k

 

[tamzzy]

always curious about the case...where do the hard drives go? o.0

 

[joelk2]

always curious about the case...where do the hard drives go? o.0

In the chamber at the back. If you look at my log you'll see a picture of them. I have hidden my ssd under the psu though.

 

[Tonester0011]

always curious about the case...where do the hard drives go? o.0

I wondered the same thing, still gotta contact Parvum to send me them out as they forgot to ship my case with them, not that it matters. Only got a single drive to mount (double sides tape) my others will be in a NAS

http://www.flickr.com/photos/parvumphotos/sets/72157632434661426/

 

[joelk2]

I wondered the same thing, still gotta contact Parvum to send me them out as they forgot to ship my case with them, not that it matters. Only got a single drive to mount (double sides tape) my others will be in a NAS

http://www.flickr.com/photos/parvumphotos/sets/72157632434661426/

It's different on the s2.0's. They've added an extra roof almost that you screw them too

 

[tamzzy]

ah that mounting doesnt look too bad

 

[joelk2]

ah that mounting doesnt look too bad

It's nice actually. 2 2.5" drives and 2 3.5" ones. Plus as many ssd's as you can stick to surfaces.

 

[Uncle Petey]

Like it, Tone

How are you going to arrange the case/rad airflow in there and have you decided on what feet are going on the bottom?

 

[Tonester0011]

Like it, Tone

How are you going to arrange the case/rad airflow in there and have you decided on what feet are going on the bottom?

Should hopefully have some feet delivered tomorrow, airflow not yet worked out. Push on the 360, push on the top 240 and pull on the front 240. Got two 80mm fans at the back pulling for cooler intakes. Not expecting fantastic temps, certainly much higher than my beloved chiller

Can't decide whether to sell or keep that beast tbh.

 

[Something Else]

obviously keep the chiller! You never know, intel or amd may release a massive clocking chip as some point which needs some serious cooling.

This wont happen