PROLIMATECH ARMAGEDDON CPU COOLERS AVAILABLE TO PRE-ORDER NOW

Ace Modder · 9 Apr 2010 at 12:33

Not available to order anywhere else! Look no further for the best in air cooling performance for your i5 or i7 rigs.

Prolimatech Armageddon CPU Cooler (Socket LGA1156/LGA1366) @ £54.99 inc VAT

Megahalems was Prolimatech’s first ever CPU heatsink and it quickly became the one to beat and paved the road for all others to follow. Months have passed and competition has once again heated up. One noticible thing is that size has become larger and larger in these heatsinks. This may not be practical as clearance becomes an issue.
With Armageddon, strap on a 14cm fan and let Prolimatech show you that power can overcome size.

- Socket Compatiblity: LGA1156 / LGA1366
- Slim yet powerful for space saving
- Dual or single fan setup
- Six high quality, high performace heatpipes
- Heatpipes: 6 x 6mm pipes
- Suggested Fans: 140 x 140 x 25mm
- Usable Fans: 140 x 140 x 25mm or 120 x 120 x 25mm
- Heatsink Dimensions without fan: 144 x 50 x 160.3mm (L x W x H)

Only £54.99 inc VAT.

ORDER NOW

bulldog147 · 9 Apr 2010 at 14:03

blimey that thing is so huge and probably won't fit in my 1366 m/board!

This must be king of air cooler!

AndyOcUK · 9 Apr 2010 at 14:05

Looks quite a bit thinner than the Megahalems.

Ace Modder · 9 Apr 2010 at 14:08

50mm is very thin for such a performing cooler.

Cosimo · 9 Apr 2010 at 14:14

Sizes:

Armageddon - (L)144mm X (W)50mmX (H)160.3mm
Megahalems - (L)130mm X (W)74mmX (H)158.7mm

Clearance from base: 44.2mm V 40mm (Arm V Meg)

liquidex · 9 Apr 2010 at 14:22

That looks like a beast! Wonder how it would perform with low airflow.

bulldog147 · 9 Apr 2010 at 14:27

I think temperature will be no difference with Armageddon. It will be the same temperature with Megahalems!

AndyOcUK · 9 Apr 2010 at 14:37

looks like it would take up a bit less space in the case:

http://www.prolimatech.com/products/cpu_cooler/armageddon.html
Photo's TAB, Picture 6

Doesn't interfere with RAM slots as many others do

Ace Modder · 9 Apr 2010 at 14:45

liquidex said:
That looks like a beast! Wonder how it would perform with low airflow.

Prolimatech recommend using a 800-1200 RPM fan on it, so should do very well and be quiet.

Ace Modder · 9 Apr 2010 at 14:47

Stock is likely to be quite limited for the first shipment at least anyway.

bulldog147 · 9 Apr 2010 at 14:52

http://www.prolimatech.com/products/cpu_cooler/armageddon.html click on accessories the picture show at the bottom!

these ArmaClip look good better than fan clip! 2 x 140mm of these: http://www.overclockers.co.uk/showproduct.php?prodid=FG-000-FD&groupid=701&catid=57&subcat=4 should do the job well but I just wonder where that 2 x 140mm fan come from on this picture here below:

smilertoo · 9 Apr 2010 at 16:07

Please tell me thats a mini motherboard.

DavieJG · 9 Apr 2010 at 17:34

i fear that armageddon + gravity = snapped motherboard haha.

that thing is ridiculous.

bhavv · 9 Apr 2010 at 18:13

DavieJG said:
i fear that armageddon + gravity = snapped motherboard haha.

that thing is ridiculous.

Its like half the size of my Asus cooler.

Jimmy23 · 9 Apr 2010 at 18:54

looks very nice :cool:

mattjd · 9 Apr 2010 at 19:10

I would rather have height than an extra wide cooler that would block my RAM and other conponents

Very sensible design.

hyperst · 9 Apr 2010 at 19:26

bulldog147 said:
but I just wonder where that 2 x 140mm fan come from on this picture here below:

There 140mm Xigmatek XLF-F1453 fans, with white leds usally

baron02 · 9 Apr 2010 at 19:27

Are these smaller in depth compared to a Titan Fenir heatsink ?

AndyOcUK · 20 Apr 2010 at 21:58

anyone tried one of these yet?

AndyOcUK · 22 Apr 2010 at 16:28

in stock now then...anybody bought one?

any comments or benchies