• Notice regarding image hosts and attachments. See here.

PSU with Many SATAs

Associate
Joined
3 Jan 2007
Posts
462
Location
London
I'm searching for a new PSU for my home server. Thanks to a load of drives and multiple cooling fans, I need one with quite a few SATA power connectors, and a few standard molex for the fans. Modular would be best to keep it tidy, and http://www.extreme.outervision.com/PSUEngine says I need 600W. Anyone seen a PSU recently that has a daft number of SATA power connectors?
 
You can buy Molex to SATA power connections which will do the job you need it to. You can grab any PSU and just get some extenders. How many drives do you need to power?
 
That's what I've got at the moment, and it just seems messy. There are multiple splitters and molex->sata adapters, including one home-built to feed 16x HDs, 1x optical, and 5x case fans. I'm in the process of retiring any HDs below 1TB in favour of fewer, larger disks, but to do that I end up in the situation like I am in right now with multiple smaller HDs attached so I can copy to multiple xTB drives, all attached at the same time, and they have to be because they're mostly in arrays. Just a messy pain. I am toying with the idea of replacing the optical drive with a 5.25" fan controller, but I've never been a fan of them. Just don't trust them as much as the on-board temperature and fan controllers.
 
Well, I have a CM Stacker 810 which is racked up with 4in3 modules, so that's theoretically 12 3.5" HDs in the front of the case, plus the optical in one 5.25 and the floppy, obviously ;) But, in a couple of the spaces for 3.5" drives, I've put 3.5" to 2.5" rails and squeezed in 4x 2.5"HDs, bringing the grand total up to 14 in the front. Oh, just realised I miscounted, because as part of this ramshackle migration to larger drives I also have 3x3TB HDs sat unsecured in the bottom of the case, bringing the total to 17HDs (had to disconnect power to optical to feed one of the new monsters) plus 5 case fans total. Used to be so relatively compact and together, but for the last couple of months it's become some sort of FrankenServer.
More than anything I'd like to migrate to something like a Norco 4220, but I don't want another case that deep (don't need EATX capability) and really can't justify £300+ on a case!
 
why 17 hard drive how could you possibly need 17 hard drives lol

It builds up quickly when none of them are particularly big and then their capacity is cut down by being in arrays etc. For example, 4x500GB disks, in RAID5, then formatted is a bit over 1.3TB, which isn't all that much, and I have two of those. So that's 8 drives for 2.6TB. Stupid amount of heat, power, and noise considering I can replace that lot with one 3TB drive these days. Add to that 2x300GB drives as mirrored boot and a few other random drives... But as I access my server remotely 99.5% of the time, it makes sense to have all the drives, plus prospective replacements attached concurrently so I can back stuff up, create new arrays, move data across, and decommission old arrays all remotely, usually from my tablet. Many other people's situation is probably different, but when I can only get 10-20mins with the actual hardware, maybe once a week, getting as much done remotely as possible has become quite important, and £90 on a decent PSU well worth every penny!
 
Back
Top Bottom