PSUs - what effect does the number of 12v rails have?

RichDuffy

RichDuffy

RichDuffy

Associate
Joined
8 Jun 2004
Posts
381
I'm looking to get a new PSU, as it would appear that my current Paxpower 460W one can't cope with the extra load of the HD-DVD drive I'm trying to add to it (what happens is that the PC powers on, the fans start up, then after about 4 seconds it all goes off - if I'm wrong about it being the PSU at fault, please tell me quickly before I buy one!)

I see lots of people recommending Corsair PSUs in various threads, but also people saying that multiple 12v rails are good. Yet the Corsair ones only have one 12v rail.

With me not even knowing what a rail is, this is pretty puzzling. Can anyone help me understand and make the right decision here? Cheers.
 
Thanks for that - so if you have mutiple rails, you have to be careful to split the load evenly... That might be my problem. Trouble is, I only have one other spare molex and it's miiiiiiiiiles away from the new drive. I don't think I can re-order things well enough to make it work.

So I'm left with either needing a molex extension cable (cheap) or a PSU (comparatively pricey)... and will need to be placing an order either way. Hmmmm. Reckon there's any chance I can persuade OcUK to shove a cable in an envelope and put a couple of stamps on it, so I don't have to pay for a courier for such a small item?
 
Okay, I've had more problems of the same type even once I unplugged the drive - took a lot of power cycling and several CMOS clears before I could get it to boot again - at which point I decided to run stock on everything (except graphics which I reduced to 650/700). So now I'm keen to get a new PSU no matter what.

Can anyone tell me what the pros and cons of the different Corsair series are? I'm looking at the TX 650W but I can see there are HX ones as well, and they seem to be more expensive. Is the TX fine?
 
You must log in or register to reply here.
Back
Top Bottom