4 Nov 2016 at 12:35 #1 Mrdavi5 Mrdavi5 Associate Joined 21 Dec 2015 Posts 23 Hello! can 1`EK-XTOP Revo D5 PWM pump support two EK-RES X3 400 Reservoirs, a cpu, 1 gpu and 1 360 rad? Thank you !
Hello! can 1`EK-XTOP Revo D5 PWM pump support two EK-RES X3 400 Reservoirs, a cpu, 1 gpu and 1 360 rad? Thank you !
4 Nov 2016 at 12:51 #2 Ploppy2k3 Ploppy2k3 Associate Joined 27 May 2014 Posts 1,160 Location Surrey I have 1 D5 pushing CPU, 2XGPU, 2x480 and 1x240 so yes you will be fine.
4 Nov 2016 at 13:06 #3 Mrdavi5 Mrdavi5 Associate OP Joined 21 Dec 2015 Posts 23 sweet! whats your loop set up flow?
4 Nov 2016 at 13:17 #4 Ploppy2k3 Ploppy2k3 Associate Joined 27 May 2014 Posts 1,160 Location Surrey CPU>GPU1+GPU2 in parallel>480>240>pump/res>480>CPU water temps never go over 38 and thats in the summer with fans at ~900rpm
CPU>GPU1+GPU2 in parallel>480>240>pump/res>480>CPU water temps never go over 38 and thats in the summer with fans at ~900rpm
4 Nov 2016 at 13:47 #5 Mrdavi5 Mrdavi5 Associate OP Joined 21 Dec 2015 Posts 23 where would you put your drain port? is it wise to do it right after your pump?
4 Nov 2016 at 13:58 #6 Ploppy2k3 Ploppy2k3 Associate Joined 27 May 2014 Posts 1,160 Location Surrey thats where I put it. its not 100% effective but its better than nothing
