Pump Problem?

[Rab]

again looking for some advice here please.
new tube res came yesterday and some new fittings.

Here my problem, pump works fine on XSPC Acrylic Tank .
so drained loop, added new tube, res, added pump top to Laing DDC-Pump.
added water. switch on pc, you can hear pump. but that is it, no water moves at all. everthing becomes hot quick. .
so started from scratch. tryed pump on xspc tank, , all good.
added top to pump again, added tube res. same again ,, no water moving.
got me baffled, what am i doing wrong. any 1 have idea.
everything secure, no leaks ect (yet)

 

[Rab]

is pump below the height of the res or above ?

none, about middle of res

Is the middle port the inlet in your loop?

If so, is it actually getting water?

not really sure, what u mean soz. pump connected from in/out on top when put together
probs got it set up wrong. this what cooling & using.
360 rad , cpu, g card, pump, res & 140 rad. best way please
thought was > rad>cpu>g.card>pump>res?
cheers for quick answer, i know probs me, just weird it works 100% the other way.
just hope get to bottom of it, already badly scraped 2 of the monsoons fittings

 

[Rab]

soz , didnt say it this top, does not have as many inlets as the pic above
http://www.overclockers.co.uk/showproduct.php?prodid=WC-300-OK&groupid=962&catid=2141&subcat=2145

thanks guys for so quick a help

 

[Rab]

has the top got too much pressure on and stopping the impella turning.

no m8, can here it working, just know flow, tryed various combinations. then ran out off tubing got some coming tomm. would all advise pump/top below res tube??

would i be best this way or any other way,

cant throw any more ££ to this now lol, 2 set tubing, fittings, pump/top, res. should have stayed on original build, these upgrades bugs
so looking for as much info/help as can get, was easier with pump/res combo

thanks again
rad to cpu, cpu to card, card to 140 rad, 140rad to pump, pump to res, res to 360 rad ?

was hoping this correct way with case

 

[Rab]

You have it running backwards, it should be res to pump then what ever way the pipes are neater

doh me, cheers m8, a move in right direction

 

[Rab]

tubing came, gonna tackle it weds. hope all ok. cheers

 

[Rab]

finally got it working, set up test, just pump. small rad & res.
used a 2x 1/4 thread connection & put pump onto res, all works great.
did not even need the extra tubing lol
thanks all