PUMp

phytal · 11 Jun 2009 at 10:44

Hey guys will a pump with these specs be good for water cooling a cpu loop only!
These are the specs:
It's a Swiftech MCP355™ 12v Water Pump (Native 3/8") (120 GPH)
Nominal voltage: 12 V DC
Operating voltage range: 8 to 13.2 VDC
Minimum starting Voltage: 9 VDC
Nominal power (@ 12 V): 18 W
Nominal current (@ 12 V): 1.46 amps
Nominal head (@ 12 V): 20.2 ft (6.1 m)
Nominal discharge (@ 12 V): ~ 120 GPH (454 LPH)
Connection size: 3/8" barbs (10mm)
Maximum pressure: 22 PSI (1.5 BAR)
Temperature range: Up to 140°F (60°C)
Power connector: Molex 4 pin
Weight: 7.3 oz (207 gr.)
Swiftech's noise measurement: 30 ~ 32 dBA in a quiet room @ 2'
(non lab environment)
Motor type: Electronically commutated, brushless DC, spherical motor
Pump MTBF: 50,000 Hours
(Mean Time Between Failures)

phytal · 11 Jun 2009 at 15:12

but it lph or gph are few compared to the D5 1200lph

phytal · 11 Jun 2009 at 16:14

which one is better this one the MCP355 or this one :http://www.overclockers.co.uk/showproduct.php?prodid=WC-047-AC&groupid=701&catid=193&subcat=1042

phytal · 13 Jun 2009 at 14:19

i'm verryy confused. Everyone is recommending the DDC pump and every vid i saw on youtube on water cooling i saw the mcp 655 in action! WTF is going on?

phytal · 13 Jun 2009 at 23:02

My Dilemma: What's the best?

phytal · 14 Jun 2009 at 06:57

the new pump i found is said to beat the DDC

phytal · 14 Jun 2009 at 13:47

What the minmum head pressure and lph for a water cooling setup

phytal · 14 Jun 2009 at 14:02

Product Details:The Koolance PMP-450 is a reliable high-flow pump with a built-in speed control knob:
•Maximum Flow Rate: ~20L/min (5.3 gal/min) @ 24V, 15L/min (4 gal/min) @ 12V
•Maximum Head Pressure: ~5.8m (19ft) @ 24V, 4.5m (15ft) @ 12V
•Motor: Brushless DC, electronically commutated, spherical motor
•Expected Lifetime: 50,000 hrs. MTBF (5.7 years)
•Power Consumption: 23W@12V, 47W@24V
•Voltage Range: 8 to 24 VDC
•Startup Voltage: 9 to 13.2 VDC
•Maximum System Pressure: 3.5 kgf/cm2 (50 PSI)
•Maximum Temperature: 60°C (140°F)
•Electrical Connector: 4-pin Molex power supply connection
•Hose Connections: 13mm (1/2") ID hose barbs
•Weight: 862g (1.9lbs)

This pump with smash the DDC in both head pressure and lph ? Am I right?

phytal · 14 Jun 2009 at 14:26

Specifications:

•Powered by OASE !
•Pump performance: max. 1500 l/h
•Delivery height: 6m
•Power consumption: 17 W
•Connection: G1/4"-connections
•Sound level: approx. 21-35 dBA
•Dimensions L x W x H: 115 x 100 x 80 mm
•DC-voltage converter L x W x H: 118 x 75 x 60 mm
•Weight: ca. 720g

phytal · 14 Jun 2009 at 14:31

Last question seriously which is the best between these pumps

Alphacool AP1510 Centrifugal Pump 12 Volts :
•Pump performance: max. 1500 l/h
•Delivery height: 6m

Koolance PMP-450 High-flow Pump:
•Maximum Flow Rate: ~20L/min (5.3 gal/min) @ 24V, 15L/min (4 gal/min) @ 12V
•Maximum Head Pressure: ~5.8m (19ft) @ 24V, 4.5m (15ft) @ 12V

Koolance PMP-400 High-flow Pump:
•Maximum Flow Rate: 8.5 L/min (2.25 gal/min)
•Maximum Head Pressure: 6m (19.7ft)

phytal · 14 Jun 2009 at 15:26

so the Koolance PMP-400 isn't it