[email protected]

[wessa1]

got mine and dropped in msi p7n diamond with 4gb ram,left evrything at stock including cpu cooler,just raised fsb from 1066 to 1333 and im getting 3 ghz with 32 degrees idle and 38 degrees under load in a coolermaster stacker with 7 x 120mm case fans,should i raise core voltage (1.23v currently? anyone? prime stable at 12 hrs
Thanks
Wessa1

 

[Cob]

No need to up the core voltage atm. You may get to 3.1ghz before you need to touch it.

 

[Richie P]

Those temps are fine. I'd raise vcore to somewhere between 1.3v and 1.4v and try and find a nice high stable point. Make sure you keep an eye on the RAM speed

 

[platinum87]

got mine and dropped in msi p7n diamond with 4gb ram,left evrything at stock including cpu cooler,just raised fsb from 1066 to 1333 and im getting 3 ghz with 32 degrees idle and 38 degrees under load in a coolermaster stacker with 7 x 120mm case fans,should i raise core voltage (1.23v currently? anyone? prime stable at 12 hrs
Thanks
Wessa1

dont increase volts at current speed, because it will only make things hotter..

try 1.3v at 3.6ghz seems yours can handle it just fine.. also use coretemp (if not using it already)

 

[Cob]

...try 1.3v at 3.6ghz...

That's a bit hopeful.

 

[Wiggins]

try 1.3v at 3.6ghz

I can't wait to see that happen!!

 

[Richie P]

 

[-iceblade^]

if you're going higher then raise the vCore.

if not, then don't bother - you'll just be creating excess heat

 

[platinum87]

That's a bit hopeful.

I can't wait to see that happen!!

hehe

 

[Cob]

That was posted by the OP tho

Even yours needs 1.4v to do 3.6ghz.