I've overclocked my q6600 to 3ghz, at 1.385v. When i prime it i abit guru tells me the temps underload are 68-69 and core temp tells me core 0 and 1 are 56 degress and core 2 and 3 are 49 (i tried to reseat heatsink 4 times but core 0 and 1 are always 5-6 degrees hotter the 3-4). i'm about 5 hours into prime the temps have been the same since 30ish secs into it (from 44 degrees idel guru and core 0 and 1 at 30 degrees, core 3 and 4 at 25 degrees idel core temp), i'm going to stop it after 8 hours (12'o clock). Are the temps ok if they stay the same?
Q6600 temps ok?
- Thread starter kidkhaos
- Start date
Associate
- Joined
- 11 Oct 2007
- Posts
- 1,287
Anything below 70 for load is fine.
Anything below 40 for idle.
Mine runs at 65 under load and 35 idle at 3.6GHz and 1.4v
Anything below 40 for idle.
Mine runs at 65 under load and 35 idle at 3.6GHz and 1.4v
