Q6600

[Spartacus]

Hi Ive just built a new PC with this CPU and want to overclock it, ..can anyone tell me which is the best way for this CPU, Increase FBS or multiplier? Is it unlocked for this?

CPU is running at 46c on full load at stock speed so should be fine to overclock I reckon. (Ive read about 60c max on load for quad is well acceptable).

 

[Spartacus]

The multi is locked, so raising the fsb is the only way to clock it

Ok thanks.

The fsb is at 272 at moment on my abit9 quad GT board , would upping it to around 300 be ok you think? anyone know roughly how much temp increase I would expect on full load from the 46c on load at 272?

This is the first time ive tried overclocking so any advice would be good

 

[Spartacus]

Ok thanks. the fsb is 272 at moment, so I might try it at 280 first, and if thats ok,then increase by 5mhz at a time.

 

[Spartacus]

I thought you could still up the multis even on the retail chips??, guess not. Mine can do 3.5Ghz with using upper multis and 266 FSB but wont go a single Mhz higher if I up the FSB so am stuck at a poltry 3Ghz 334FSB.

Ive just tried a small overclock to test it, upped the fsb to 280 and its stable 2.52ghz ..cpu still around 46c on full load. I'll keep upping it bit by bit. I'll be happy with it stable at 2.7ish as i dont wanna mess around with voltage changes etc.