-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
Quad Core default voltage
- Thread starter Voltage
- Start date
Soldato
- Joined
- 21 Jan 2003
- Posts
- 7,050
- Location
- Northamptonshire
^ everything defaults to 1.325v on the bad axe2 
lol
lolCob said:
Managed to get to 370x9 quite comfortably with only a slight vcore bump,temps are still a problem though as I haven't had time to setup my Water cooling yet.I'm off work next week though so i'll have more time to get things setup properly.
Seem to be hitting a bit of a wall above 380x9 though,but I'm yet to establish whether it's the chip or the board crapping out,I really need to get some decent cooling setup before I can make any firm judgement.
Soldato
- Joined
- 21 Jan 2003
- Posts
- 7,050
- Location
- Northamptonshire
mine wont go above 380mhz fsb with a quad core 
temps are not too bad, but not brilliant.
I could get 410mhz on the fsb with my 6400.
What other voltages are you using?
and have you turned off watchdog in the fail safe bios?
Let us know what settings your using mate,
temps are not too bad, but not brilliant.
I could get 410mhz on the fsb with my 6400.
What other voltages are you using?
and have you turned off watchdog in the fail safe bios?
Let us know what settings your using mate,
Datamonkey said:mine wont go above 380mhz fsb with a quad core
temps are not too bad, but not brilliant.
I could get 410mhz on the fsb with my 6400.
What other voltages are you using?
and have you turned off watchdog in the fail safe bios?
Let us know what settings your using mate,
Yeah,I've turned off watchdog and C1E in maintenance mode.
I'm currently at 380x9 but temps are a problem and will be until I get my water set up.
I'm finding some stability@380 with vmch maxed(1.7) FSB maxed (1.65) vcore (1.45).
Running on 1066 strap,memory 1:1@ 4,4,4,12/2.2vdimm,will hopefully tighten mem timings.
Soldato
- Joined
- 21 Jan 2003
- Posts
- 7,050
- Location
- Northamptonshire
nice one,
same settings here apart from 1.325v on the v-core and 1.65v on the mch.
380x8 though, as you say temps are a problem so water cooling is needed.
Wish we could dis-able the speedstep, its a pain in the arse, but i suppose at the moment if its helping keep the temps down when idle i can live with it.
same settings here apart from 1.325v on the v-core and 1.65v on the mch.
380x8 though, as you say temps are a problem
so water cooling is needed.Wish we could dis-able the speedstep, its a pain in the arse, but i suppose at the moment if its helping keep the temps down when idle i can live with it.