Question about Ryzen Master

[vian_siu]

I just started using Ryzen Master to get the most out of my 5950x. The result is pretty good, but Ryzen Master has to load to apply the settings every time the PC starts. So my question is, do you just leave it like that, or should you apply the settings to the bios? And do Ryzen Master settings override the bios settings?

 

[vian_siu]

It turns out Ryzen Master changed my bios settings to the optimised setting after I ran the PBO optimiser. I do have one problem: it crashes for a specific low-powered game (Romance of Three Kingdoms 14), but everything else, including benchmarking, is fine. I control the clock speed with max fan speed and temperature now.

 

[vian_siu]

I got my settings directly from Ryzen Master. It put all the cores to -30. I keep my max fan speed at 70%, and my max all-core boost for Cinebench is 4.4 GHz. My Cinebench score is about 27500 with the PBO and fan settings. I probably can get higher if I turn up all the fans, including the case fan, or have a better cooler than my current one (Noctua DH-15). I dont know what to put for the TDC, PPT, EDC so I leave them to whatever got from Ryzen Mater.

 

[vian_siu]

More than likely low load errors, load up corecycler, edit the config to run ycruncher. Bet it fails, but it will let you know what core or cores.

I ran core cycler overnight and got no errors.

When I had all my cores -30 via Ryzen Master on my 5950X I'd crash a lot when idle but never when full load.

I used this thread as a kind of guidance and altered my bios directly.

Reddit - Dive into anything

www.reddit.com

You need to find out which cores rank best to worst and note them down.

I lowered my max temps and fans and it seems to not crash anymore, runs quieter, but slightly slower.

 

[vian_siu]

I did both and got no errors. But I still get the odd random restart.