Quick Q about memory Volts.

[azaniah]

Installing my new kit today, which include 4GB of Corsair 2GB DDR2 XMS2-6400C4 TwinX

It's going in a IP35-Pro and I read somewhere that you need to make sure you have the correct volts set as the Abit defaults to 1.8V.

Don't suppose anyone can tell me what it is suppossed to be at Stock. I've booted with just 1 stick so far to make sure nothing explodes.

Cheers

 

[Rroff]

grab a copy of memtest86+ write it to CD, stick the RAM in, boot from the CD, start at 1.8v and run through atleast 3 passes, if it fails up the voltage another 0.1v until its stable... try to keep below 2.2v.