Quiet, Small Case.....recommendations please

Associate
Joined
1 Feb 2006
Posts
346
Location
Demon Overclocker
Hi all


I'm sick of the noise from all my performance PC's & want a quiet case to throw some mid-range parts into.

I only need 1 hdd so don't need much space.


Any ideas??
 
Lian Li PC-7+:
CA-054-LL_400.jpg

- Dimension: 210x450x490 mm ( W,H,D)
- Drive bays 4x5.25", 2x3.5", 3x3.5" internal
- Fan: 12 cm ball bearing x 1, 8 cm sleeve fan x 1
- M/B type: ATX & pentium 4 (max size: 12"x9.6")
- PSU Type:ATX
- USB2.0 x 2 IEEE 1394 x 1MIC x 1EAR x 1

Or if you want something smaller:

Lian Li PC-A05B Aluminium Midi-Tower - Black
CA-087-LL_400.jpg

- 5.25”bay x 2, 3.5”x 1, 3.5”internal x 3
- Fans 12cm ball bearing fan x 2
- M/B Type ATX M/B(max size: 12”x9.6”)
- Top I/O USB 2.0 x 2, IEEE1394 x 1, MIC x 1, EAR x 1
- Dimension 210x381x490mm (W,H,D) 8.26'' x 15'' x 19.3''
- Slot PCI slot x 7

Or if you're going Micro-ATX:

Lian-Li PC-V300 Aluminum Micro ATX Mini Tower Case - Black
CA-077-LL_400.jpg

- 5.25"x 2, 3.25"x1(position can be exchanged on right or left), internal HDD x 2
- 8 cm Ball bearing fan x 3( 2 rear holes for option 4cm fan)
- Micro ATX (max size: 9.6"x 9.6")
- USB2.0*2, IEEE1394*1, MIC*1, EAR*1
- 280*250*353 mm(W,H,D)
- Takes ATX PSU
 
Last edited:
I'd go lian li listed above but also include the g50 and v600 which are the same size as the a05 but use a different psu mounting, its above the cpu.

Silverstone Sugo SG01e has to be on the list, especially if used with an nt06 (works passively with 120mm fan on psu), sg02 which is a restyled sg01e and the SG03 which is a tower version. Theres also the TJ08 which is a matx case in a more traditional layout.
 
lsg1r said:
I'd go lian li listed above but also include the g50 and v600 which are the same size as the a05 but use a different psu mounting, its above the cpu.

Silverstone Sugo SG01e has to be on the list, especially if used with an nt06 (works passively with 120mm fan on psu), sg02 which is a restyled sg01e and the SG03 which is a tower version. Theres also the TJ08 which is a matx case in a more traditional layout.

I think the A05 is slightly taller (2cm perhaps) than the V600/G50. For that reason, the only reason I can see for going with a C600/G50 is if you have very tight space restrictions.
 
Back
Top Bottom