Radiator expert advice needed

I'm currently using the Noiseblocker NB-eLoop Fan B12-PS*fans any recommendations for a better fan or will these be OK
 
I must ask what else you are cooling such that the airflow through the H320 isn't enough. The radiator used is a 30mm 12fpi rad which means very low impedance for airflow.

I would suggest investing in another set of fans for push pull or add some fans to the roof to increase airflow before trying a new rad which involves a lot of work.
 
Hi Disco p I should have explained my situation a bit better, the cpu is being cooled great it's my gfx card that's the problem ever since I moved up to a 2560x1440 monitor. So I'm getting rid of the 360mm radiator and putting 3 fans on front to push cool air through the case
 
You would be best off getting a reservoir, hardly any radiators have them built in like the H320 does and filling/bleeding a loop without a reservoir is a real **** I haven't done it in years and wouldn't want to again, Y/T lines are something best left in the past.
 
ubersonic said:
You would be best off getting a reservoir, hardly any radiators have them built in like the H320 does and filling/bleeding a loop without a reservoir is a real **** I haven't done it in years and wouldn't want to again, Y/T lines are something best left in the past.
Click to expand...

Hi Im only cooling the cpu and the XSPC EX240 Multiport Radiator does hold quite a bit of liquid and I can easily reach one of the ports to fill as required
 
I got an EK 240 on mounted on the top in my 540,fits fine,if your wanting to use it with the with the threads at the backside of the case you may find you will need some rotary connections tho.

Cooling wise it would be fine for just a CPU aswell

Edit: Same goes for the multiport too,its the same apart from the extra ports.You should be ok filling this one too just by revmving the cases top mesh,should have enough room to undo one of the top side ports and fill
 
Last edited:
delpy8 said:
Hi Disco p I should have explained my situation a bit better, the cpu is being cooled great it's my gfx card that's the problem ever since I moved up to a 2560x1440 monitor. So I'm getting rid of the 360mm radiator and putting 3 fans on front to push cool air through the case
Click to expand...

Why not add the gpu to the watercooling loop?
 
No. If using a liquid such as Mayhems you don't even need a silver coil. If you add the gpu into the loop you won't have to change radiators plus you will get much lower gpu temps.
 
You must log in or register to reply here.
Back
Top Bottom