Radiator Grills

Gundog48 · 14 Jun 2011 at 00:01

I have never used a radiator grill before and have a few questions. Basically I am modding a TJ07 for air cooling and I will be installing 2x 120mm fans using a 120.2 rad grill.

I am getting the fan holes cut for the midplate. However, are the mounting holes in the same position on every 15mm spaced grill? So if I told them to cut 2x 120mm fan holes and drill the mounting holes, would they know what I was on about?

Also, what screws do I need to mount a fan directly onto the grill and to attatch the grill to the case?

Cheers!

Gundog48 · 14 Jun 2011 at 18:30

Could someone give me a quick answer, you watercooling guys must know!

shadowscotland · 14 Jun 2011 at 19:00

15mm between the fan fixing is now standard - but if you have the grill, use it as a template.

joxang · 14 Jun 2011 at 19:04

Fan holes and spacing are all standard. Just say you want the two fans nestled right next to each other and it'll be fine. That will leave the standard 15mm between the screw holes.

3/8 inch screws for fans (M4? I think - someone confirm). Actually, just standard fan screws you get with case fans

.

Gundog48 · 14 Jun 2011 at 22:48

Cheers! How about the screws that attach the grill to the case? Are their positions standardised too? I'd just use a nut and bolt to hold that down right?