Ram Recommendation

Associate
Joined
1 Mar 2025
Posts
4
Location
London
Which DDR5 32G Ram from the Overclockers shop do you recommend, Oh you great experts? (I will get 2 of them in order to have 64G).
I have the TUF Gaming B650-Plus Wifi mobo, Ryzen 7 7700 B-Core Processor, Win 11 Pro.
My main use is content creation/video editing.
I currently have the stock 2 x Corsair 16384 4800Mhz with Expo Tweaked set at DDR5-4800MgHz.
Merci!
 
This is not recommended with DDR5, I'd get 32x2 instead (or 2x48).
Getting 2 x 32 is what I intend to do, apologies if my initial post was not clear about this-The Overclockers shop list of DDR 5 Ram is: 5200 MHz, 5600 MHz, 6000 MHz, 6200+ MHz & 7200+ MHz. Given my mobo & my needs, which are recommended?
 
Getting 2 x 32 is what I intend to do, apologies if my initial post was not clear about this-The Overclockers shop list of DDR 5 Ram is: 5200 MHz, 5600 MHz, 6000 MHz, 6200+ MHz & 7200+ MHz. Given my mobo & my needs, which are recommended?
Oh right, the recommended speed is 6000, preferably C30, e.g.

My basket at OcUK:

Total: £417.97 (includes delivery: £7.99)​

6200 or 6400 is sometimes possible to run (depends on the CPU's memory controller), but not something I'd do myself, especially since you plan to run dual rank sticks.

To run higher speeds than 6200-6400 you will have to run the RAM out of sync and that has a performance loss that needs very high speed memory to compensate. There's an article which talks about that here and the points are similar for your Zen 4 CPU, as for Zen 5:


With most workloads, the performance loss below 6000 is not that big, so if you can find a great deal on a slower kit (e.g. there's been some big deals on Crucial Pro kits lately), I wouldn't worry.

 
Last edited:
Oh right, the recommended speed is 6000, preferably C30, e.g.

My basket at OcUK:

Total: £417.97 (includes delivery: £7.99)​

6200 or 6400 is sometimes possible to run (depends on the CPU's memory controller), but not something I'd do myself, especially since you plan to run dual rank sticks.

To run higher speeds than 6200-6400 you will have to run the RAM out of sync and that has a performance loss that needs very high speed memory to compensate. There's an article which talks about that here and the points are similar for your Zen 4 CPU, as for Zen 5:


With most workloads, the performance loss below 6000 is not that big, so if you can find a great deal on a slower kit (e.g. there's been some big deals on Crucial Pro kits lately), I wouldn't worry.

Merci. So the upper limit (in my case) seems to be 6000Mhz. Useful to know, and thanks for the Puget System article.
 
Merci. So the upper limit (in my case) seems to be 6000Mhz. Useful to know, and thanks for the Puget System article.
I think I'll go for the G.Skill Ripjaws M5 (2x32GB) as the CAS numbers look good (CAS 28-36-36-96), and there is a lifetime warranty. I'll decide over the w/e-When rendering videos lasting 1 to 3 hours and with complex special effects, any minute you can shave off the total rendering time is a godsend, as FX are done by the CPU, so there is a lot of shuffling of your video material between memory & CPU.
 
I think I'll go for the G.Skill Ripjaws M5 (2x32GB) as the CAS numbers look good (CAS 28-36-36-96), and there is a lifetime warranty. I'll decide over the w/e-When rendering videos lasting 1 to 3 hours and with complex special effects, any minute you can shave off the total rendering time is a godsend, as FX are done by the CPU, so there is a lot of shuffling of your video material between memory & CPU.
Personally, I wouldn't. Reason being, from what I can see they're nearly £100 more expensive than a cheap C30 kit and you can never 100% guarantee that any memory overclock will play nicely with your CPU/motherboard, which would be very frustrating if you just paid top dosh for a premium part, but just "meh, whatever" if you cheaped out.
 
Back
Top Bottom