This is for a friend, we were talking about upgrades and i asked what Ram he got, wen we looked it was 2gb running at 333mhz is there any way to check if this is the default coz that seems awful low concidering he bought it november last year...
he's a copy from PC wizard:
Information SPD EEPROM (DIMM_A1) :
Manufacturer : Crucial Technology
Part Number : RM12864AA667.8FEÿÿ
Serial Number : 83061B4D
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (1 ranks, 8 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
(oviously same applies for slot B1)
any help?
he's a copy from PC wizard:
Information SPD EEPROM (DIMM_A1) :
Manufacturer : Crucial Technology
Part Number : RM12864AA667.8FEÿÿ
Serial Number : 83061B4D
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (1 ranks, 8 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
(oviously same applies for slot B1)
any help?
