RAM under-clocked?

[Nathanleg]

Hey guys, just a quick question I purchased this RAM quite a while back but never bothered to check frequency's etc.

http://www.overclockers.co.uk/showproduct.php?prodid=MY-183-OC

I might just be being really stupid here but it looks like the RAM is under-clocked.
The RAM is installed on an Asus m4a785td-v EVO

Here are the CPU-Z screenshots:

Like I said, I might just be really dumb xD but could someone clarify if these readings are ok or too low etc.

Thank you for any help.

 

[Tythus]

Is the red outline bit on the board where you have installed your ram?

 

[Nathanleg]

Yes sorry I should have mentioned that

 

[andy_mk3]

Check your instruction manual, but you'll need one stick in each colour for it to run in dual channel. Usually in slot #1 and #3.

 

[RJC]

Your ram is running ok, you need to double what CPU-z shows as your using double data rate ram.

As CPU- z shows dual I beleve your running dual channel rather than single but double checking the manual won't hurt.

 

[Jokester]

Your ram is running ok, you need to double what CPU-z shows as your using double data rate ram.

What he says.

 

[Muel]

Check your instruction manual, but you'll need one stick in each colour for it to run in dual channel. Usually in slot #1 and #3.

Opposite way round on that board and every board I've ever owned. Matching slots for dual channel.

As said, it's DDR RAM so you need to double the reading from CPU-Z.

 

[Nathanleg]

Thank you for the reply's, I was beginning to get concerned that the RAM was under performing and wanted to check before attempting to OC.

Again, thank you for the help

 

[andy_mk3]

Opposite way round on that board and every board I've ever owned. Matching slots for dual channel.

As said, it's DDR RAM so you need to double the reading from CPU-Z.

Ah. My old MSI board was opposite colours