Hi Guys
Launching today for pre order with us, a range of blocks for the rampage black edition. XSPC and EKWB have you covered with many options.
we even have an OcUK Tech Labs board.
massive overclocking potential.
OcUK Tech Labs - Asus Rampage IV Extreme Black Edition Intel X79 Watercooled Motherboard From £514.98 inc VAT
Assembled in house by Expert OcUK Technicians
The world's most powerful and versitile overclocking motherboard. The addition of the Ultra High end waterblock kit from a selection of premium manufacturers make this the ultimate motherboard choice.
Maximise your Overclocking potential and system lifespan with this custom cooling solution providing incredible running temperatures as well as mind-blowing aesthetics.
Every Watercooled motherboard sold by Overclockers UK is assembled by an Expert OcUK technician and tested for quality assurance before it ships to the customer.
From £514.98 inc VAT.
ORDER NOW
XSPC Rampage 4 Black Waterblock Set @ £74.99 inc VAT
Motherboard waterblock set for the Asus Rampage IV Black Edition motherboards
Technical Details
Block A Dimensions: 110 x 119 x 18.5mm
Block B Dimensions: 109 x 18.5 x 23mm
Top Material: Acetal
Base Material: Copper
Ports: G1/4”
Box Contents
1x R4BE A Waterblock
1x R4BE B Waterblock
2x Black Thermal Pad
2x Blue Thermal Pad
2x M2x8 Screw
2x Black Washer
1x K2 Thermal Paste
Only £74.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE - Acetal+Nickel @ £95.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £95.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE - Nickel @ £95.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of nickel plated electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £95.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE - Acetal @ £86.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £86.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE @ £86.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2 x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £86.99 inc VAT.
ORDER NOW
Launching today for pre order with us, a range of blocks for the rampage black edition. XSPC and EKWB have you covered with many options.
we even have an OcUK Tech Labs board.
massive overclocking potential.
OcUK Tech Labs - Asus Rampage IV Extreme Black Edition Intel X79 Watercooled Motherboard From £514.98 inc VAT
Assembled in house by Expert OcUK Technicians
The world's most powerful and versitile overclocking motherboard. The addition of the Ultra High end waterblock kit from a selection of premium manufacturers make this the ultimate motherboard choice.
Maximise your Overclocking potential and system lifespan with this custom cooling solution providing incredible running temperatures as well as mind-blowing aesthetics.
Every Watercooled motherboard sold by Overclockers UK is assembled by an Expert OcUK technician and tested for quality assurance before it ships to the customer.
From £514.98 inc VAT.
ORDER NOW
XSPC Rampage 4 Black Waterblock Set @ £74.99 inc VAT
Motherboard waterblock set for the Asus Rampage IV Black Edition motherboards
Technical Details
Block A Dimensions: 110 x 119 x 18.5mm
Block B Dimensions: 109 x 18.5 x 23mm
Top Material: Acetal
Base Material: Copper
Ports: G1/4”
Box Contents
1x R4BE A Waterblock
1x R4BE B Waterblock
2x Black Thermal Pad
2x Blue Thermal Pad
2x M2x8 Screw
2x Black Washer
1x K2 Thermal Paste
Only £74.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE - Acetal+Nickel @ £95.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £95.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE - Nickel @ £95.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of nickel plated electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £95.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE - Acetal @ £86.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £86.99 inc VAT.
ORDER NOW
EK Water Blocks EK-FB KIT ASUS R4BE @ £86.99 inc VAT
EK-FB KIT ASUS R4BE is a complete water cooling solution for ASUS Rampage IV Black Edition motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is a high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2 x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-CSQ fittings are compatible with this water block!
Made in Slovenia - Europe!
Only £86.99 inc VAT.
ORDER NOW