Random crashes

]MadBoy[ · 4 Jan 2007 at 12:46

Well i think ive sourced the problem, i have run Memtest (windows desktop version) and got errors. Went back to the manufacturers website and put everything to what they advise, Ram speeds this is. Reset to stock speeds and Memtest is now ok. But still getting errors like page fault in none paged area, Driver irql not less or equal.... all pointing to ram. Put on asus probe, and pretty much all my rails are BELOW. Checked with speed fan:

Vcore1: 1.42V
Vcore2: 0.00v
+3.3v: 3.26v
+5v: 5.03v
+12v: 12.03, was 11.97 before
-12v: -1.25V
-5v: -8.78v
+5v: 5.11v
vbat: 3.06v

PSU is enermax noisetaker II 600W are these voltages ok? Is this my problem? I have had a few powerstrikes recently, but im on a £120 surge protector and clean power filter From Monster.

]MadBoy[ · 4 Jan 2007 at 13:05

anyone else got a noisetaker II 600w? Could you post your voltages please.

]MadBoy[ · 4 Jan 2007 at 14:03

does it matter if the rails drop below the stated?

]MadBoy[ · 4 Jan 2007 at 14:30

seems to be 11.97v at load, prime95 1 instance, and memtest 1 instance, 3.27v on load. I'll try in game see what happens, im sure the other rails will drop also, im sure its supposed to be above the stated figure.

]MadBoy[ · 4 Jan 2007 at 14:51

well it seems after monitoring it the voltages on the 12v alone dropped to below 11.8v under load. Ill monitor the other voltages too, see what happens.

edit: 3.3v drops to 3.2v, would it be safe to say i need a new Psu?

]MadBoy[ · 4 Jan 2007 at 19:40

see mine sits at idle at 12.03v, ive sent an email to enermax, with screenies, they gave me an instant RMA number!

]MadBoy[ · 4 Jan 2007 at 21:57

check this, havent crashed yet today, but look at this:

doesnt stay much over 12 at all. I have an RMA number so ill whip it out on sunday.

]MadBoy[ · 5 Jan 2007 at 14:25

found out that they have a +-5% tolerance on the PSU, so according to that all is good! Must be memory then

I should be worring if I drop to below 11.4v