• Notice regarding image hosts and attachments. See here.

Random Restarts

Associate
Joined
10 Nov 2006
Posts
555
After recently purchasing a new Seagate 320GB 7200.10 and overcoming a few niggly little problems, i'm experiencing completely random restarts.

It will only happen when i switch on my computer after it's been off overnight or for a considerable length of time and has only started since i've installed the new HDD. It happened a few times when i was installing Windows. What can i do to find out what's causing it, as it's completely random?

Any help appreciated :)
 
Hmm, it's a possibility although it's a fairly new PSU. I think it's an Enermax 500W. I'll check when i get home. Should this be enough to power my spec? This being the case, why would it be ok when it's left on for hours? It'll literally only happen if i turn my computer off for a few hours.

Gigabyte DS3
6300 @ 2.8Ghz
2GB Geil 6400
Seagate 320GB 7200.10
Maxtor DiamondMax 250GB
X1900XT
DVD RW
Fan Controller
Card Reader
3 x 120mm Actua Fans
 
Nope, they aren't blue screens and i don't get a message or pop up when i restart windows. I've turned off Automatic Restart hoping that i'd get a blue screen but i've had no such luck. It's really quite annoying!

P.S. It's definitely an Enermax Liberty 500W
 
Last edited:
Fan Controller is an Akasa FC-03. Not sure if that's regarded as cheap or whether it combines 12/7v wires. Any way of checking? I'll remove a few things when i have time and see if it works. Only problem is that once it's happened, i'll have to leave it for hours before i can try it again :(
 
Hmm....Sometime today my internet has stopped working. I can't even connect to the router. I pulled my USB Network Adapter out and the computer restarted almost instantly. Saying that, i also turned my fans on high about a minute before then, so i'm guessing it's one of the two.... :confused:
 
Hey,

I do already have CPU-Z but i'm unable to find anything within it which lists the PSU Volt readings. The PSU is an Enermax Liberty 500W, bought fairly recently. Last night was the first time it's rebooted when it's been left on for hours.
 
I've just knocked the front of my PC with my foot very gently and it restarted instantly. When i was putting it all together, the standoffs for the motherboard weren't long enough and so the screws from my Tuniq Tower kept touching the motherboard tray and shorting it.

I've used ever so slightly longer standoffs which just about clear it, although to be honest, it looks like they're touching. Is this likely to be the problem?

:confused:
 
Back
Top Bottom