reaper settings

lazyk · 12 May 2008 at 19:11

wondering if someone could advice what settings i should use, i ordered a preoverclocked system coz im a complete noob when it comes to oc settings

my system was completely screwed and they've sent me replacement memory,
had 4x1g ballistix tracer 8500 and now i have 4x1g reaper hpc 8500, i was told when i got it i'd need to make some adjustments to the settings before i use the new memory, but they haven't got back to me yet so was hoping someone here might know what adjustments i need to make so im not sitting here with an unusable pc all day

the systems a ip35 pro q6600 system clocked at 3.222, i can provide screenshots of all the current bios settings if this would help

Cob · 12 May 2008 at 19:33

A screenshot of CPU-Z's Memory tab should be enough to get started

lazyk · 12 May 2008 at 19:57

hello again

well heres both

Cob · 12 May 2008 at 20:13

Well it's only running at 895mhz, so you can stick on the next highest divider/ratio (DRAM Speed 1:1.5) in the uGuru menu. You *may* need to go to 2.3v as that's what the memorys spec says, but i've a feeling the current 2.2v may be enough.

The timings are grand, so no need to play with them

And drop your ICHIO 1.5v Voltage down to 1.55v. That's more than enough for your settings.

lazyk · 12 May 2008 at 20:29

ok i'll give that a try and see what happens in memtest

lazyk · 12 May 2008 at 21:37

no errors on first run through, looking good so far

Cob · 12 May 2008 at 21:54

Good good

If you do come across a problem then up your MCH voltage up another setting.