Rebuild wont start. Please help

Status
Not open for further replies.

RichB

RichB

RichB

Associate
Joined
28 Nov 2013
Posts
131
I rebuilt my pc and it worked fine for a day. Psu blew which I tested by pinning 4 5 and no fan.
Installed new psu and now I get mbios bbios leds flashing when I pwr up with nothing but main and cpu cable attached.
Psu ticks as the 2 leds flash.
mobo is gigabyte auros master z390
I'm desperate.....please help me...
 
RichB said:
Installed new psu and now I get mbios bbios leds flashing when I pwr up with nothing but main and cpu cable attached.
Psu ticks as the 2 leds flash.
Click to expand...

Can you make these statements clearer? I don't really understand what you're saying.
 
RichB said:
I rebuilt my pc and it worked fine for a day. Psu blew which I tested by pinning 4 5 and no fan.
Installed new psu and now I get mbios bbios leds flashing when I pwr up with nothing but main and cpu cable attached.
Psu ticks as the 2 leds flash.
mobo is gigabyte auros master z390
I'm desperate.....please help me...
Click to expand...
Why have you started a second thread? I have already replied to the original one providing links to troubleshooting!

Rebuild in trouble. Please help.

I rebuilt my pc and it worked fine for a day. Psu blew which I tested by pinning 4 5 and no fan. Installed new psu and now I get mbios bbios leds flashing when I pwr up with nothing but main and cpu cable attached. Psu ticks as the 2 leds flash. mobo is gigabyte auros master z390 I'm...
forums.overclockers.co.uk forums.overclockers.co.uk
 
Last edited:
Tetras said:
Can you make these statements clearer? I don't really understand what you're saying.
Click to expand...
Basically with just new psu connected with main and cpu cable to the board, the psu trys to start and ticks, as it does the mbios and bbios leds flash, it then repeats.
 
RichB said:
Basically with just new psu connected with main and cpu cable to the board, the psu trys to start and ticks, as it does the mbios and bbios leds flash, it then repeats.
Click to expand...

If the PSUs were modular, are you using the cables that came with the new PSU, or the old ones?
 
RichB said:
The cables that came with psu.
Same thing happens if I disconnect the cpu cable.
Click to expand...

So, all that happens is the PSU ticks and the LEDs flash? You get nothing else whatsoever, no fans, no nothing? It sounds like the old PSU may have killed your board, unless the new PSU is also faulty.

There's no chance of a short in the case, right?
 
Last edited:
Tetras said:
So, all that happens is the PSU ticks and the LEDs flash? You get nothing else whatsoever, no fans, no nothing? It sounds like the old PSU may have killed your board, unless the new PSU is also faulty.

There's no chance of a short in the case, right?
Click to expand...
I've already replied to him in his original thread.

Rebuild in trouble. Please help.

I rebuilt my pc and it worked fine for a day. Psu blew which I tested by pinning 4 5 and no fan. Installed new psu and now I get mbios bbios leds flashing when I pwr up with nothing but main and cpu cable attached. Psu ticks as the 2 leds flash. mobo is gigabyte auros master z390 I'm...
forums.overclockers.co.uk forums.overclockers.co.uk
 
Tetras said:
So, all that happens is the PSU ticks and the LEDs flash? You get nothing else whatsoever, no fans, no nothing? It sounds like the old PSU may have killed your board, unless the new PSU is also faulty.

There's no chance of a short in the case, right?
Click to expand...
 
I just plugged in another old psu and the same.
Can I reload the bios without it starting up or as bbios is a backup, can I use that?
 
Status
Not open for further replies.
Back
Top Bottom