Recommend me some settings please

The Goat

The Goat

The Goat

Associate
Joined
24 Jun 2010
Posts
7
Hi
I am new to this & would like some help to tweak my PC,basically I'd like to get the best possible safe performance I can but need to know what I can change & how far it would be safe to go.

Can any of you please recommend what to change & what to change it to?

Here is the current std setup:

cpu-z1.jpg


cpu-z2.jpg


cpu-z3.jpg


cpu-z4.jpg


cpu-z5.jpg
 
The main thing you would notice is OC'ing the CPU. It sounds like you don't really know how to do this so i would advise you to read through some of the guides on this site and others untill you feel reasonably comfortable with what you are doing.

We can't really give you a set of values to enter as every chip performs differently.
 
I know how to clock the CPU,the MB Intelligent Tweak tool in the bios allows me to change the CPU Frequency & Clock ratio (multiplier) as well as the CPU voltage.

I would like to know what frequency & multiplier to start with based on the spec of my CPU,what sort of size increments I should increase the frequency by each time & what realistically would be a safe limit.

At the moment all values are set to auto.

Would playing with the the CPU voltage be of any benefit?,if so what would be a safe voltage increase?,th std CPU voltage is 1.3000v
 
Michael_10 said:
If you have control of the multiplier I would increase that slightly, and see if your system is stable.
Click to expand...
I do have control of the multiplier & frequency & I know what to do,the trouble is everything is set to auto at the moment,what I am after is for someone to recommend a starting point for both based on the info given in my op ;) :)
 
You must log in or register to reply here.
Back
Top Bottom