• Notice regarding image hosts and attachments. See here.

recommendations for 4 year old rig

The PSU's posted previously are better than that BeQuiet unit.

And I have to ask, why the CPU downgrade? :rolleyes:

Ah right, I misread his CPU in the OP. I'd keep that CPU. Regarding the PSU, the BeQuiet units are quite well regarded. Aren't they FSP OEM? I have the 600W Efficient 80+. Never done me wrong.
 
Ah right, I misread his CPU in the OP. I'd keep that CPU. Regarding the PSU, the BeQuiet units are quite well regarded. Aren't they FSP OEM? I have the 600W Efficient 80+. Never done me wrong.

Haha no worries.

BeQuiet PSU's are pretty decent yeah, but some of the PSU's posted previously such as the 550W XFX (currently on offer for around £48) have Seasonic as the OEM, so are likely to be higher quality units :)

I have the FSP 600W 80+ as my spare PSU.

That system would be pulling around 500W at peak load with a 470, they are hungry hungry cards those old fermi's. I would want a 600W really if I were to get a second hand 470.
 
Last edited:
I can't believe your machine is running without a fan?? thing must be running so hot. I had fan fail once and the whole machine would shut down about 5 minutes after starting up.
 
I can't believe your machine is running without a fan?? thing must be running so hot. I had fan fail once and the whole machine would shut down about 5 minutes after starting up.

"I've also had a message on boot up saying the cpu fan is not working press enter to continue. this doesnt happen that often but when it does the fan isnt on but when I press enter it bursts into life!!!"
 
Yeah that's the message that comes up and I press enter and it works fine. Can't remember what the idle CPU temps are. I haven't been in the bios for about 2 years. I don't know how to overclock but never needed to yet. Plus with my current spec I wouldn't trust it.

So does can anyone tell me about the difference between the cable management on the modular and non modular PSU's?

Also that was the windows 8 I was looking at as it looks a bargain to me.
 
With a modular PSU you only can effectively remove all of the PSU cables you don't need, so it's easier to keep tidy.

This. And in your case, tidiness with a non-modular PSU would be a bit of an issue. As far as I can see the PSU location is at the top and it has no cable management features.
 
Ok. I think I will go with the xfx 550w. I'm not fussed about looks. There's plenty of space in my case and plenty of wires as it is. None getting in the way of the components already in there.
 
Thanks to all of you for your help. I've finally ordered the parts. Windows 8 updater, XFX 550w core edition, enermax-t40 heatsink and MSI hd 7850 1gb.

After looking at some reviews around the web I chose the enermax t40 instead of the t60 as it (the t60) will probably interfere with one of the ram slots on the motherboard and I'm using all four. The t40 has been well rated on reviews I read. So saved £8 and went a little more expensive on getting the MSI 7850 1gb instead of the HIS as this has also got good reviews and even outperformed a sapphire 2gb version in a test. Also has slightly higher spec than the HIS 7850 on offer at the mo.

Hope I've made wise choices, I reckon the PSU is gonna definitely help a lot to power the new gpu and hopefully help more with keeping everything else a little cooler.

I've never fitted all these parts myself before and just assisted my mate who knew how to build computers. So I may be asking for a bit more help if I get stuck.
 
Last edited:
Thanks to all of you for your help. I've finally ordered the parts. Windows 8 updater, XFX 550w core edition, enermax-t40 heatsink and MSI hd 7850 1gb.

After looking at some reviews around the web I chose the enermax t40 instead of the t60 as it (the t60) will probably interfere with one of the ram slots on the motherboard and I'm using all four. The t40 has been well rated on reviews I read. So saved £8 and went a little more expensive on getting the MSI 7850 1gb instead of the HIS as this has also got good reviews and even outperformed a sapphire 2gb version in a test. Also has slightly higher spec than the HIS 7850 on offer at the mo.

Hope I've made wise choices, I reckon the PSU is gonna definitely help a lot to power the new gpu and hopefully help more with keeping everything else a little cooler.

I've never fitted all these parts myself before and just assisted my mate who knew how to build computers. So I may be asking for a bit more help if I get stuck.

Awesome stuff :)

The performance increase from a 9500GT to an HD7850 will be immense. Enjoy :)
 
Hello again, I said I'd need some help.

I haven't got my parts just yet but decided to get my old heatsink out which I found was held in by the four clips. I got it out ok as I thought I'd give it a clean out after discovering how dusty it was. The problem came when putting it back on. Trying to line up all four clips is hard enough but when you do the clips won't squeeze through the hole as they are to wide to start the process. It looks like you need to be able to squeeze the clip together and then push down. Doing that in such a small space is very difficult even with my small hands.

Any advice on making this easier.
 
Back
Top Bottom