In process of building rig in my sig below.
Have a query on ideal fan setup for TJ09. Already have a bunch of 800rpm and 1200rpm Noctuas left over from my last build so trying to decide how to spread these around.
First off - not bothering with a Rheobus. Just want the fans to run quiet (not silent) with decent airflow. Case is afterall going to be under a table and not going to be messing around with it. I also heard the sidepanels can rattle at 5v with some fans, so that's another reason not to mess with a rheobus.
- Anyway, should I leave the 2 stock fans as is ? They are the 2 most vital fans for cooling so if I was going to replace them it would be with 2x1200rpm Noctuas...nothing any louder. Are the stock fans which are also 1200rpm good enough not to bother with the Noctuas ? I ask cause the GPU fan looks a pain to remove.
- For the hard drive fan, and 2 tops fans, since these areas are probably the most noticeable for noise, I am planning to use 800rpm Noctuas. Top fans blowing in or out ? Is an 800rpm Noctua good enough to cool 2 raptors and 1 1tb hitachi ? Should I use the 1200rpm Noctua instead. And how should I spread the drives out - 2 raptors in the bottom bay so they get airflow first, and Hitchi in top bay or all 3 on bottom ?
- Are 60cm or longer sata cables needed if using bottom HD bay ? Same with opticals in top 2 bays ? Will I need 60cm cables or greater.
thanks
Have a query on ideal fan setup for TJ09. Already have a bunch of 800rpm and 1200rpm Noctuas left over from my last build so trying to decide how to spread these around.
First off - not bothering with a Rheobus. Just want the fans to run quiet (not silent) with decent airflow. Case is afterall going to be under a table and not going to be messing around with it. I also heard the sidepanels can rattle at 5v with some fans, so that's another reason not to mess with a rheobus.
- Anyway, should I leave the 2 stock fans as is ? They are the 2 most vital fans for cooling so if I was going to replace them it would be with 2x1200rpm Noctuas...nothing any louder. Are the stock fans which are also 1200rpm good enough not to bother with the Noctuas ? I ask cause the GPU fan looks a pain to remove.
- For the hard drive fan, and 2 tops fans, since these areas are probably the most noticeable for noise, I am planning to use 800rpm Noctuas. Top fans blowing in or out ? Is an 800rpm Noctua good enough to cool 2 raptors and 1 1tb hitachi ? Should I use the 1200rpm Noctua instead. And how should I spread the drives out - 2 raptors in the bottom bay so they get airflow first, and Hitchi in top bay or all 3 on bottom ?
- Are 60cm or longer sata cables needed if using bottom HD bay ? Same with opticals in top 2 bays ? Will I need 60cm cables or greater.
thanks