Red led light

[clickit888]

On boot up it will show the led light for boot then my pc will power down and a red led light will show indicating the dram, this will happen for about 6 seconds then the light will go back to boot and then no more led lights and i'm happy at windows 11 (well almost ive got a blue tooth power failure problem in the device manager) Is this something to worry about and should it not be ignored?

i7
couple of sticks of ram =32gb

gigabyte z690 rev 1

m.2 ssd

no fan headers being used all and running through usb

 

[mickyflinn]

Have set xmp profile in the bios for the correct memory speed and timmings ?

Download memtest and check for errors.

 

[clickit888]

Have set xmp profile in the bios for the correct memory speed and timmings ?

Download memtest and check for errors.

I enabled it a while ago to get the full read out from the sticks but that was about it.

 

[mickyflinn]

I enabled it a while ago to get the full read out from the sticks but that was about it.

Are they running at correct speed if yes download memtest to check for errors, it's free ?

MemTest86 - Download now!

Download your free copy of MemTest86 here for USB.

www.memtest86.com

Also try each stick individually see if the same result.

 

[Tetras]

(well almost ive got a blue tooth power failure problem in the device manager) Is this something to worry about and should it not be ignored?

Where does your bluetooth come from, is it a pci-e card, or on the board?

 

[clickit888]

On the board, not sure if i have fixed it actually with microsoft drivers as the device manager now recognizes it but the mainboard is gigabyte so hope it still works properly.

 

[clickit888]

got the mem 86 link as well