Reverb G2 - Black Screens

Associate
Joined
27 May 2008
Posts
931
Location
Petersfield, Hampshire
Has anyone else's G2 started black screening ?
Mine is cycling through the following after warming up (5-15 minutes of use):
- normal operation for a few seconds
- right eye goes black (a couple of seconds)
- left eye goes balck (a couple of seconds)
- both eyes go black (a few seconds)
- both eyes back on (a few seconds)
- repeat

This is my second G2 that is doing this. The first was replaced under warranty after confiming it wasn't a cable issue.

I've tried all sorts of things including a new cable, different DP & USB ports on the PC, USB power settings, a fresh install of Windows.
Also tried a USB PCIe card, and a DisplayPort repeater.
Tried options using both OpenXR, SteamVR, and on a variety of games.

I believe it's an overheating issue near the cable conenctor on the headset, but before I pull it apart to fit a small fan in that area I wondered if anyone else had seen / resolved this issue ?

Thankfully I kept my original G1 as a backup and am using that in the mean time.
 
I'm not sure why it seems that the headsets are breakign after ~8 months, although I was a fairly heavy user in this time.
I've noticed from other people seeing the same issues, that is always seems to be on a newer headset. The old ones don't seem to be reporting the same issue.
If what I've posted helps anyone else in this situation, then that's me happy.
 
Hope it works out for you.
If you need any help, just shout.

You will also need the 4 little spacers that have tabs on the side to allow you to screw the original screws into them, then the front plate screws fix into the other side.
The tabs on the spacers push stop them from spinning when you're trying to tightne them up. Don't go too tight, or you may split them in half.

Only other thing, is I'd suggest ny-lock nuts for the ones internal to the HMD... you don't want those coming loose.

good luck :)
 
Back
Top Bottom