RIVF + 4930 + GSkill Trident X

Nickolp1974 · 7 Dec 2013 at 13:25

Hi bud just wanted your thoughts on this, what would you do next?? keep pushing the bclk??

ram is tweaked as far as it will go without more volts unless you can recommend/or tell me otherwise

vcore in bios 1.41v with medium llc
ram 1.75v
sa 1.25v
vtt 1.2v
pll 1.65v

Have tested for stabillity and all is well, also just ran IBT(dont normally just used it to show you temps, was set to extreme)

thanks

Nickolp1974 · 7 Dec 2013 at 13:51

gone some more, all volts same as above but vcore 1.44v in bios with high llc

Edit: this required couple more clicks of vcore to be fully stable to 1.46

Nickolp1974 · 7 Dec 2013 at 15:54

BaDBoY_uK said:

what did you manage tony and how many volts on the core did you go??? sure my temps are fine for upto 1.5v but not sure about the vrm's

Nickolp1974 · 10 Dec 2013 at 07:40

Looks like i'll be putting the tuning plan to use then!! I'll wait till after xmas now though.

Nickolp1974 · 18 Dec 2013 at 22:40

Got my ram upto 2570mhz c10 @1.785v quite pleased with that, although a tuned 2400 c9 gives better results at the same volts

Does the BE have ram dividers?

Nickolp1974 · 19 Dec 2013 at 17:31

rpggamesplayer said:
is 1.75v on memory safe if memory is rated at 1.65v?

yeah, i've run upto 1.85v for benching

Nickolp1974 · 19 Dec 2013 at 17:38

whyscotty said:
And then some more

Nickolp1974 · 19 Dec 2013 at 22:22

Ah, the big man, been busy ian??

Anyways re-post from above

Got my ram upto 2570mhz c10 @1.785v quite pleased with that, although a tuned 2400 c9 gives better results at the same volts

Does the BE have ram dividers? As to get to 2570 on the formula on 125 strap i need to run a very high bclk, as its on its limits gonna keep em at 2500mhz and tighten them up, what do you think?

And merry xmas

Nickolp1974 · 20 Dec 2013 at 20:39

scotsdragon said:
where do you guys get your maxxmem2 I tried major geeks but downloads freeze at 84 percent tried IE and chrome both same results?

Try this http://www.softpedia.com/dyn-postdownload.php?p=130633&t=5&i=1

Nickolp1974 · 23 Dec 2013 at 12:20

TRFC won't budge from 196, running these settings at 1.75v, all stable and tested

Nickolp1974 · 23 Dec 2013 at 22:47

scotsdragon said:
Is there a version of memtweakit that runs on windows 8 pro I cant seem to get any to work?

Think i dL'ed mine off asus support site

Nickolp1974 · 20 Jan 2014 at 11:29

Hi Ian can you give me some basic timings/settings so I can test there raw speed potential??
12-14-14-35-2t-??-??

Just curious that's all but need the right settings, rampage tweak?? Latency boundary??
They will do 2570cl10 just want to see how far they wil go, IMC dependent of course.

2.4c10 trident x, rivf, 4930k

Thx man!! Looking forward to your next shows, hopefully with audio!!