Running PC in low power mode?

hyperseven · 22 Jan 2015 at 15:34

Have a multi role PC, when not gaming would like to leave it powered on and use a a Plex server.

I know afterburner can have 2D/3D profiles but cant seem to get them to work?

Is there anything I can use to down clock my CPU
other than going into the BIOS each time and applying a different preset?

The PC has an ssd and four HDD's and reset of specs in sig.

hyperseven · 22 Jan 2015 at 16:38

CPU is always @ 4.5ghz

hyperseven · 22 Jan 2015 at 17:30

wazza300 said:
enable c3/c6 states aswell in bios

would that not effect my current OC stability?

hyperseven · 22 Jan 2015 at 17:40

wazza300 said:
it shouldn't do

doesn't affect mine at all,make sure intel speedstep is enabled aswell

thats the EIST option I take it, it's auto at the moment, leave it or set enabled?

hyperseven · 22 Jan 2015 at 17:52

wazza300 said:
how much cpu voltage you use in cpu-z while stressing?

1.380v.

hyperseven · 22 Jan 2015 at 17:59

wazza300 said:
ok try

cpu voltage set to normal (scroll through voltage till you see normal)

set dvid to +0.050

set loadline calibration to high

set pwm phase control to extreme performance

set vcore voltage response to fast

manually set cpu/pcie clock to 100

try that,then see how much cpu voltage in cpu-z while stressing,if too much try +0.040v dvid,if too low try +0.060v in dvid

get it as close to 1.38v as you can

aslong as you do that and enable eist/c3/c6 and c1e it will downclock

THese were my current settings

hyperseven · 22 Jan 2015 at 18:09

wazza300 said:
change em to what ive put,all the rest is fine on auto

Cheers for the assist, will give hem a go later on or tomorrow