Ryzen 3600X ALL Core Overclock 4425Mhz DDR4 CL16 4200Mhz

[gerardfraser]

Memory clock-2100 =4200Mhz
Fabric clock- 1800 =3800Mhz
All core clock - =4425Mhz

Did all core overclock 25Mhz more than whats printed on the box,I like writing that.

EDIT:As per request by MrPils,CPU 1.325v ,enjoy

At the 4.00Minute mark in video I answer some question in the video lol for fun.

So I been testing for a couple days.I only play games ,so the overclock will not be prime stable and I do not even care.

Anyway I will be using boost clock which boost up to 4525Mhz and that is perfect for me.

I just did overclock thru Ryzen master and you can see all DDR4 timings.
HWinfo64 for all voltages and fan speeds.

So I fired up Kingdom Come Deliverance a game known for the great hardware killer and made a quick video.

 

[gerardfraser]

LOL youtube quality,I could not even read the 4K upload.I will re-upload for those interested
Memory clock 1.5v -2100 =4200Mhz
All core clock CPU 1.4v-4425Mhz

 

[gerardfraser]

1.4v is also too high for these new zen cpus.

This is false,too low voltage is no good

Fk using 1.4v on the daily.

You need higher voltage on Ryzen 3K ,just go over to overclock.net and see what stilt has to say about low voltage

Regardless of peoples opinions on stability this is one of the highest all core OCs i've seen - this dude's chip is good silicon. Where it gets interesting is comparing it to my "bad" 3600(not x), I can get 4175mhz all core @ 1.425v custom watercooled. I imagine with another 0.025v you'd be able to reach whatever stability target people set provided it was cooled, so it looks like the OC spread is very roughly 250mhz best silicon to worst silicon. There will be outliers, I certainly wont have "the worst ever", but a 250mhz range doesn't leave much wiggle room. With so little room to work with its no wonder PBO can do 90% of what a manual overclock can achieve.

Just as a further point of comparison, and if you don't mind spending the time to do it, where can you get to all core with 1.325v fixed? This seems to be what people are recommending for super safe all core daily volts. Mine does 4050mhz @ 1.325v, 25mhz more and it bluescreens during realbench. Full load temps reach a mighty 47c running AVX, I'm definitely not temperature limited lol.

Now you get it,so I done up video as you will see when i upload at 1.32v on cpu .I rather run higher voltage

You might get better performance if you drop RAM speed to 3800MHz and go for 1900MHz infinity fabric, keeping them in sync.

what you ask is impossible.Fabric can not go higher than memory but i have run fabric up to 1900 testing fine and also 1.5v on b-die ram is fine,i a not sure where people come up with these things ,any back to game.

DOHH I just noticed I forgot the last two cores ,it is ok though and game has 60FPS cap sorry .Well this could go on all day ,I am done for now back to testing this CPU.Thanks for the replies

At the 4.00Minute mark in video I answer some question in the video lol for fun.

 

[gerardfraser]

show me 1 hourt pass of Aida stress test and i give ya my respect and memory test numbers. What timings You are running ?

Do not look at the video for timings.Your out of your mind if you think I want any respect from you.
OH sorry maybe you can not read ,I apologize ,here ya go.
2nd video-DDR4 CL16 4200Mhz
1st video- DDR4 CL14 3600Mhz

If you have IF at 1900MHz and RAM at 3800MHz then they're in sync. You're unlikely to make any gains pushing memory above 3800MHz because of the extra latency you get from having the memory clock higher than IF.

Sorry misread your comment,thought you said 3600ram and 1900fabric.
There is a bug in BIOS after memory goes higher than 1900+ and you will not gain much FPS untill fixed.

 

[gerardfraser]

Dude i am not going to argue with you,call you names.I am bragging about an unstable system that only works when gaming.Come on you do not really believe that.
so when i said

So I been testing for a couple days.I only play games ,so the overclock will not be prime stable and I do not even care.

that makes you offended and all riled up and you think your system is better than mine after 1.5hours where I on the other hand be testing for days.

Should i actually post a video in this thread where my system is actually stable with prime/intel burn test etc ,which i already posted but not in this thread.

The video BTW is to show people it can be done and I purposely made a video with 25Mhz over Max rated boost clock written on the box.You should reread MrPils first post in here.
Also I bought 2x3600X and still testing the first one and it can do 4525Mhz boost.Hoping the second one can do higher.

Maybe I will lend you one when I am done testing but certainly it wont be in 1.5 hours.J/K I would not give you ****.

 

[gerardfraser]

PI 4 baby

 

[gerardfraser]

Some context to go with this:
Really, you don’t have much play at all at the moment.

Thanks for the information ,I should have added it in my comments.

 

[gerardfraser]

No problem for the test at all.
So also for anyone interested,with AMD overclock Precision Boost Overdrive Up To 4525Mhz on my chip.This AMD overclocking voids warranty for AMD lol. and can be really aggressive and maybe too aggressive for some people.
So I made a video of the game i am currently playing Outlast 2,great game.

AMD overclock Precision Boost Overdrive jist of video
Boost clocks up to 4525 Mhz
CPU voltage average 1.53V-1.57v 95% of the playing for about 45 minutes
CPU temperatures hitting 78C
I am fine with all these numbers,it may not be the same for all.