RYZEN 5 2600 AMD BUNDLE

[scott fisher]

so i received the AMD bundle which has
AX370 GAMING 3
RYZEN 5 2600
TEAM FORCE VULCAN RAM 3600G
I have built this and I'm getting power but just no display to monitor I can see the PC is booting up but I get no signal,
do I have to come from the monitor to the GRaphics card or straight to the HDMI port on IO shield???
I have lights when boots and cpu fan is spinning , but no display please someone help me
I cant imagine its a bios issue as the pack is PUT TOGETHER BY OVERCLOCKERS surely all parts in the bundle are compatible? please someone help so I can play my damn PC ! ,
thanks in advance...

 

[scott fisher]

so iv re fitted the graphics card (zotac 1050ti mini) seems it doesn't need a power lead to power it ? anyway yes the graphics card fan is spinning and cpu fan, but just no signal to monitor ( this monitor has been displaying HDMI through my laptop for months no problem).
Please help me

 

[scott fisher]

now I'm getting signal to the screen but its just blank
now even a boot screen just black screen but monitor had green LED to show that it is receiving something. ?

 

[scott fisher]

can a moderator help or at least point me in the right direction

 

[scott fisher]

hmm I don't think so I haven't heard any sounds
I have a light on displaying for (VGA) on the board but my graphics card doesn't need power as far as I know .

 

[scott fisher]

am I really to believe that still to this day I am being sold a bundle that is incompatible....?? well I need this fixed.

 

[scott fisher]

yea just tried the one stick and some different combinations for that matter, still no good
, i am noticing that after about 30-45 seconds the monitor comes back on from standby mode but just diaplays a blank black screen? and stays like that, I'm pretty sure the PC is running but somethings just not outputting...

 

[scott fisher]

yup tried all them methods except PSU as i don't have another, I'm using a HDMI to DVI cable to this monitor I'm sure its not the monitor. https://www.amazon.com/Acer-G226HQL-21-5-Inch-Screen-Monitor/dp/B009POS0GS

 

[scott fisher]

the vga light only stays light for around 5 seconds after powering up , then goes away and shows no fault lights, could it be that i cant run for the first time with an adapter lead like hdmi-DVI

 

[scott fisher]

ill make a video soon and post a link maybe that would be better.

 

[scott fisher]

no spare gpu no, just to check , the only sata cable ive used is 1 that goes from the board to my SDD i don't need one anywhere do i ?

 

[scott fisher]

it is very brief in the manual stating that if lights are on then theres a fault doesn't say about a short period on start up.

 

[scott fisher]

if i clear the CMOS will it wipe the supposedly updated bios though?

 

[scott fisher]

been trying at this for like 7 hours, I'm gonna have to sleep and try again in the morning ill create a video and link it

 

[scott fisher]

Ok I’ll try in the morning and report back thank so much for your time so far

 

[scott fisher]

right round 2 , i have all day lets get this infernal thing working i have made a video sorry if its poor quality it does auto focus at times :/ i hope this helps you get a better ida of whats happening,did i mention now that the VGA lights goes after around 20-30 seconda and i just have a red BOOT light then . but still no display
here is the video link https://www.youtube.com/watch?v=tj1soTPQ4tg&feature=youtu.be

 

[scott fisher]

yea tried the cmos thing, no luck , i tried another pcie slot and it shows vga error again , but this cpue has vega graphuics so it should display without gpu?

 

[scott fisher]

i really hope OC UK will help me fix this. I'm so frustrated that all the things in a bundle didn't work out the box...

 

[scott fisher]

oh really , lucky i bought gpu then as i was going to run without :/

 

[scott fisher]

I'm trying to post on gigabytes website but its so hard and long to get approved for posting there :0