Sabertooth P67 boot problems

Bellows · 25 Sep 2013 at 13:44

Hi, today on 1st boot got the problem overclock fail F1 to bios,
P67 Sabertooth 3602 bios
i7 2600k turbo to 4.4 or did
2x4 xtreme lv 2133
intel 330 60gb SSD
SanDisk 240GB Extreme SSD
samsung f1 1tb
raptor 150
msi gtx 770 gaming
gigabyte 800w psu
i was running 103.0, 43, ram on xmp but now i keep getting red light above mem ok button, ive tried all 4 ram slots still red light, swapped ram over for my corsair vengeance 1600 2x4gig and exactly same thing, if i hold mem ok button for 3 odd seconds pc reboots and stops on overclock failed f1 bios poop again, cleared cmos umpteen times, pc will only boot now on default settings, do i have a mobo ram slot problem, cheers

Ginger-Menace · 25 Sep 2013 at 13:46

change the 103 to 100 try that, sandy bridge doesnt like you to mess with the multiplier

Bellows · 25 Sep 2013 at 13:48

hi, i have, dont work, no matter what happens pc stays in loop or fans just stay 100%, only default settings boot, i cant even leave everything default and put ram on xmp setting as that fails also

8 Pack · 25 Sep 2013 at 13:54

That sounds like a memory fault. Test each stick one at once on XMP.

Try IMC volts also.

Bellows · 25 Sep 2013 at 13:57

hi, tried that also, exact same problem on both sets of ram, IMC volts ?

8 Pack · 25 Sep 2013 at 14:19

VCCSA, VTT, VCCIO

Bellows · 25 Sep 2013 at 14:32

dam pal, ya loosing me now, all i originally did was click the over clock button, change the 103.0 to 100 and 43 to 44 and and put ram on xmp, ran fine till today. all this imc, vccsa = pft, ya might aswell put me in a barrel n tel me to pee in a corner, i was quite happy turbo boosting as and when needed

Bellows · 25 Sep 2013 at 14:52

no matter what i do keeps telling overclock failed and F1, i have to leaver everything default setting just configure boot options

8 Pack · 25 Sep 2013 at 16:03

Can you then boot windows etc??

Do a full system clear with Bios battery out for around 30 mins and try again.

Maybe your bios has become corrupt at some stage so maybe a bios flash is called for.

Bellows · 25 Sep 2013 at 16:54

Hi, did what you said, pulled power cord, removed battery, re flashed 3602 bios again, default settings pc boots fine, touch xmp setting and overclock fail or pc turns on n thats it with fans 100%

Ginger-Menace · 25 Sep 2013 at 16:58

you could try setting the memory timings manually

Bellows · 25 Sep 2013 at 17:05

tried that also, overclock failed, i'll just have to wait n see what bull poop asus have to say in forum and support

8 Pack · 25 Sep 2013 at 17:06

I think this a memory thing I really do. DO you have other sticks to try.

Bellows · 25 Sep 2013 at 17:15

seems like anything over 1333 fails, fails on xtreme lv 2133 and on corsair vengeance 1600

Bellows · 25 Sep 2013 at 21:57

hi, also tried mates corsair dominator gt 2x4 8gb 1866mhz and ax1200 psu, exact same dam problem, pc wont boot over 1333, soon as F10 save/reset pc sits with fans on 100% till i power off, on power back on overclock failed as usual. tried my ram in mates pc with z77 sabertooth and his pc boots no problems what so ever, can even set X.M.P on both my sets of memory with no mom ok red light showing. if i press/hold mem ok button pc starts up fine, till i shut down/re start then overclock failed F1 poop as usual