Safe 24/7 o/c ?

[tipes]

Hi all,

Have been trying some o/c on my rig and have currently these settings:-

356X9
Memory ratio 1:1 = 712MHz (800 is stock speed)
Bios settings:-
pci express 100
pci clock sync 33.3MHz
spread spectrum - disabled
Cpu core - 1.3250
fsb termination voltage - Auto
Nb core - Auto
Sb core - Auto
ICH chipset - Auto - What is this?

Cpu setting in bios:-

C1E support - Disabled
Max CPUID - Disabled
Vanderpool - greyed out
Cpu TM - Disabled - Is this safety thermal management for cpu?
Execute disable bit - Disabled
PECI - Disabled - What is this?

Ram timings set to 4,4,4,12 as per manufacturers settings

Have been able to run Orthos for 3.5 hours with no problems, should i run it for longer?

Temperatures Idle - 25 degrees
Under test with orthos maxed out at 52 degrees.

Sorry for the long post, but any advice and answers to the questions raised would be very appreciated as i am learning about all this. I think you guys are great on here & very helpfull.

Btw according to Intels site the voltage range for the C2D 6600 is 0.850 to 1.352 so am worried about taking voltages too high.

Mark

 

[dannyatkin12]

Not sure on the details but when i overclock i run it for 12 hours minimum.