Sanders......

Magic_x_uk · 11 Feb 2010 at 15:50

Quick question. Need to sand all my inside window sills down as having new UPVC windows installed in 2 weeks time. Stained Brown at moment, but eventually will become gloss white.

Just wondering what these Black and Decker,Mouse's are like for doing the job. Need to do it before windows are fitted as so not to scuff new windows when fitted.

although I do have a belt sander but was thinking it may be A) bit to powerfull? and B) wont get into corners.

Hopefully some helpfull chaps on here to answer.

Cheers.

[DOD]Asprilla · 11 Feb 2010 at 15:52

Why are you sanding them down? Just to change the colour?

If that's the case, it's much easier, quicker and more effective to give an undercoat or stainblocker.

The Dread Pirate · 11 Feb 2010 at 15:53

[DOD]Asprilla;15941776 said:
Why are you sanding them down? Just to change the colour?

If that's the case, it's much easier, quicker and more effective to give an undercoat or stainblocker.

This.

However why those ****y plastic window frames Wood frames are stronger plus they look nicer.

Magic_x_uk · 11 Feb 2010 at 15:59

I was under the impression because the are at present stained and varnished. They would need sanding as to make a 'key' for the new paint.

Also, I have wood at moment, being changed for good quality UPVC. Wood can be good in the right setting, just not suited for my needs.

DB&DB · 11 Feb 2010 at 16:07

Had my mouse sander for 8 yrs. Has only just died, after a spilage incident!

Great for detail work, and corners. Will leave swirl patterns in wood work. (due to them being orbital sanders)
Brilliant for leaving a Key for the new paint to stick to!

The belt sander will be too powerful, unless you wanted to go back to a wood finish!

G-Dubs · 11 Feb 2010 at 16:08

Black and decker mouse is just the job for sanding windows. done my whole house with one and they're great. the nose lets you get into allthe corners and cos they'e not too heavy your arm doesn't get too tired.

Magic_x_uk · 11 Feb 2010 at 16:14

Thanks guys I shall pick one up from B & Q when I pass next. Presume there is just one sort to buy?

Sure it will come in usefull around the home for other jobs.

Also, am I right in thinking when sanded, give a coat of undercoat before a coat of white gloss?

DB&DB · 11 Feb 2010 at 16:21

Yes,

1x coat Primer (water based dries quicker)
1x coat of undercoat (oil based)
2x Gloss/Satinwood (or 1x One coat Paint)

The primer seals the wood better.

You can get primer/undercoat in one!

Magic_x_uk · 11 Feb 2010 at 16:29

Thanks DB&DB,

will have a look next time in B&Q or the like.