Seems nice and cool :)

Peperami · 12 Aug 2013 at 23:11

Just finished putting the PC back together and installing some stuff, and decided to test out how cool she was running.....

Specs are

Intel Core i7 4770K overclocked to 4.5GHz - Gigabyte Z87X-OC Motherboard - 16GB TeamGroup Vulcan ORANGE 2133Mhz Memory - Alpenfohn K2 Mount Doom Premium CPU Cooler - Sapphire HD 7970 VAPOR-X GHZ 3072MB GDDR5 - Asus Sonar D2 7.1 - Enermax 85+ PSU (1200W) - Samsung 840 Series Pro SSD with Main Operating System - 2 x 2TB Barracudo SATA3 HDs - All wrapped up in a Scout 2 Case

Video conversion using 8 cores, load at 100%

[URL=http://s1004.photobucket.com/user/Peperami/media/Screenie_zps366c0489.jpg.html]

[/URL]

She is running standard at the moment but I do have the lovely people at Overclockers to thank for setting it up on a 4.50 stable overclock

pryere · 12 Aug 2013 at 23:32

Looking good. Should that be 6 x 2GB HDD's?

Peperami · 12 Aug 2013 at 23:44

That should have read 2 x 2TB Barracuda Sata3 HDs

Th3M8dH8tt3r · 13 Aug 2013 at 01:37

Sweet. Good to see some other temps. My 4.5 AMD FX8150 runs at the same temps on full load. GTX680 4GB is also at 50 under full load and they're all in the same loop.

Doomedspeed · 13 Aug 2013 at 07:08

Have you tried Pime 95? See what temps you get then.

Peperami · 13 Aug 2013 at 10:28

will be running that tonight see what happens

james_2k · 13 Aug 2013 at 11:42

erm, doesnt look very overclocked in that screenshot.

Peperami · 30 Aug 2013 at 17:45

james_2k said:
erm, doesnt look very overclocked in that screenshot.

Did say at the bottom of the post that it was running standard at the moment, just wanted to make sure everything was running as it should

PRIME95 installed, not sure what tests to run, but here are a couple of screenies

First one was in-place LARGE FFTs second was BLEND I think thats the right way around

Cool enough do you think?

Will post more hopefully tonight when I crank it up to 4.5 stable overclock

Ewok · 30 Aug 2013 at 19:44

yes run a prime95 small fft's torture test and see what the temps do then. also note what the vcore is at when under load, this will indicate if its a good temp for that voltage or not

Peperami · 30 Aug 2013 at 23:28

Ok well I have now changed the BIOS profile to the OC one, hard to tell as I am a noobie if its now running at 4.50 instead of the default 3.50

I have run the Prime95 Small fft's test, and taken a screenie for you Ewok with hopefully all the info you need, let me know if its good lol although the temps are quite a bit higher now

[URL=http://s1080.photobucket.com/user/Pickles5932/media/TEMPS.jpg.html]

[/URL]

Peperami · 30 Aug 2013 at 23:30

might need to go to the actual image on Photobucket and double click the bottom right hand side Magnifier, I can read the about too well my eyesights not what it was lol

scotsdragon · 30 Aug 2013 at 23:45

Its fine on temps and on volts but remember that you need to run prime for an good hour or two atleast just so the chip can get upto full temps (if you havent already)

Peperami · 31 Aug 2013 at 00:05

I will do that tomorrow, BF3 awaits

Ewok · 31 Aug 2013 at 14:49

hmmm is this watercooled? the specs in first post suggest air, but comparing those temps to mine with same cpu and same mb but watercooled with an EK supremacy block and I am pretty sure my temps would be a lot higher than that with that voltage. I am hitting 77-79 already and my voltage is set to max 1.16v to keep temps down while yours seems to be at 1.272!! When I left it on auto voltage it went to 1.39v I think and ended up at 100c within seconds so i quickly shut it down and dropped the voltage!

Wonder if there is something wrong with mine then, jesus there must be if yours is using much higher voltage and doing better temps on AIR!