• Notice regarding image hosts and attachments. See here.

serious air cooling

I have 15cm [approx] from mobo to case. done with the specific measurement of a plastic ruler and eyesight.

reckon I might still go for the NH d14, this case is not long destined to be replaced and slicing holes in it isn't a big worry provided I can still somehow wangle the side fan back on

What case do you have?

Then you know exactly how much space you have.
 
in win griffon [before someone says it, I know not the wisest choice]. I already had to mount the side fan outside the case just to get a 7850 shoehorned in.

gonna be going for a corsair 600t soon so no worries about space until I start into a full blown wc setup
 
So when did NH-D14 first appear?
Thermalright IFX-14 was out in 2008. First review was August 2008 and it was out before that.
Think Noctua NH-D14 was late 2009-2010. First review I know of for NH-D14 is December 2009
 
damnit, who bought the last two d14's?

just gonna have to order and wait for more stock. sadly in my current situation height is a bit of a constraint. gonna have a quick measure to be sure before hitting the order button

Sorry :eek: finger has been hovering over the buy button for a few weeks now lol
 
silver arrow cooler is good aswell

For me it was between the Silver Arrow or the Noctua.
Reason I chose the Noctua was because it cleared the heatspreaders on the G Skill Ripjaws on the video's and pictures that I have seen but I couldn't get enough info on the Silver Arrow.
 
With the phanteks if you have highish heatspreaders, you can relocate the front fan to the back and have both pulling through the heatsinks.

I have found the phanteks are easy to fit, al least in comparison to my TRUE120mm.
 
Noctua and Phanteks have better fan clips.. and mounting are easier too.

If Thermalright mounts and fan clips were as good as their coolers they would be the best. ;)
 
My Noctua arrived today and after eating the Haribo (always 1st port of call) I installed it and initial findings were good.
Asus Sabertooth 990FX Rev 2.0, AMD Piledriver 8350.
Before: stock speeds/fan @4Ghz temps hit a high of 45° during an hour of BF3
After: slight O/C with Noctua @ 4.3GHz temps hit a high of 34°
My Radeon Hd 6870 hit 58° with stock cooler and 56° with the Noctua.
It certainly feels a lot more breezy in the case now and I'm definately happier with the new cooler thats for sure, might look into going for a better O/C soon and maybe better cooling for the 6870.
 
^ looks like you have pretty much the same spec as me then [albeit everythings a little newer on yours]. how'd you find it for ram clearance? i'm not too worried myself because mine doesn't have any big heatsinks on but it'd be nice to know what clearance to expect
 
For me it was between the Silver Arrow or the Noctua.
Reason I chose the Noctua was because it cleared the heatspreaders on the G Skill Ripjaws on the video's and pictures that I have seen but I couldn't get enough info on the Silver Arrow.

I have both those coolers and tbh either is a good choice,no clearance issues for me with either cooler and Samsung green ram
 
^ looks like you have pretty much the same spec as me then [albeit everythings a little newer on yours]. how'd you find it for ram clearance? i'm not too worried myself because mine doesn't have any big heatsinks on but it'd be nice to know what clearance to expect

As I have the G- Skill Ripjaws I had to make sure before I bought any cooler because of the size if the heat spreaders on them. I found a recent video on youtube where a guy had the same memory and the Noctua cooler and there was around 5mm clearance. But without getting the manual out again I'm sure you can just undo the clips on the fans and just lift them to your liking.
 
@evohicks;
Glad to see it all worked out as planned. Depending on what cooler your 6870 has you may be able to remove the stock shroud and fan/fans and replace with better fans using zip-ties
Like this; you can just see the end of red zip-tie in corners.
IMG_0161_zps2ac7bd5a.jpg



@adolf hamster;
NH-D14 with ripjaws
LLhttp:
 
Last edited:
@evohicks;
Glad to see it all worked out as planned. Depending on what cooler your 6870 has you may be able to remove the stock shroud and fan/fans and replace with better fans using zip-ties
Like this; you can just see the end of red zip-tie in corners.
IMG_0161_zps2ac7bd5a.jpg

This is the sort of thing I was looking for thanks. I will upgrade my card but not until I get the funds so this will help as I'm sure I have a few fans lying around.:)
 
i'm running geil black dragon, same size as the sammy greens. that image is very helpful doyll, it looks like i can expect plenty of clearance.

now just to wait for it to come back in stock and dig out the dremel for cutting a hole in the side of my case :P
 
Back
Top Bottom